DIVE EQUIPMENT

AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is PR10892574 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2022-07. The associated North American Industrial Classification System (NAICS) code for this procurement is 451110 with a small business size standard of $15.00M. This requirement is a Small Business Set-Aside and only qualified offerors may submit bids.
The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on:
2022-09-20 17:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above.
FOB Destination shall be in the Statement of Work.
The DOS International Narcotics Law Enforcement Affairs - Department of State requires the following items, Brand Name or Equal, to the following:
LI 001: Rebreather System, Unity It Must have the option of ventral and dorsal use of closed circuit oxygen and semi-closed nitrox. The rebreather must be extremely compact for low water resistance while swimming. It must have a RADIAL type soda lime filter container designed for large capacity and optimum CO2 absorption. It must have Cordura soft shield material to protect the lung of the rebreather against tears, abrasions and adapt special equipment. Front or back oxygen unit: automatic (valve on demand) and manual control (by-pass) of oxygen injection. Nitrox front unit: must have three different flow injectors available for different nitrox mixtures (60% O2, 40% O2 and 32% O2). It must be able to switch from closed oxygen circuit to semi-closed nitrox circuit and vice versa during the dive. No tools should be required for setup and operation. It must have the ability, in its NITROX dive mode, to go down to a maximum depth of 57 meter and it must have the storage temperature capacity between -30 C 70 C. Its operating temperature must be between -2 C 40 C and it must have a variable volume breathing lung capacity of 8.5 to 13 litres. It must have a RADIAL type Container with 2.2 kilos of CO2 absorbent and must contain O2 and Nitrox Cylinders must be Low Magnetic Footprint Aluminum Alloy. The capacity of the cylinders must be 0.8 lts/200 bar for NITROX and 1.5 lts/230 bar for Oxygen. And they must allow their exchange with each other for use in different types of missions.Its dimensions should not be greater than 660 x 350 x 140 (length x width x height) and it must be olive green. Its weight in the air does not exceed 16.7 kilos, with CO2 absorber included in its O2 and NITROX version. It must be neutral in the water. It must have adaptability capacity to: use in dorsal mode, increase your diving time only with larger volume cylinders, incorporate O2 partial pressure check system, use with any Full Face mask, incorporate external Bail out system (air) or direct from nitrox source. Must include basic maintenance kit. It must include a system to measure flows, for the pre-dive phase, in semi- closed circuit operations. It must include a transport box, military style, made of high resistance plastic. Must include training for use in closed circuit mode. For operators and a training for instructors in CCr. Must include maintenance training at all levels. With maintenance kits and special tools. It must have a technical service system available for online or telephone consultations, in Spanish and a representative in Colombia. With annual visit capacity for scheduled inspection. Must have gas mixing kit and it must have a cylinder with a cut-off valve for Nitrox. REFERENCES AMMV- AM-01, KIT095, BOM041B, KIT097. https://www.sielnet.com/products/rebreathers/ or similar //, 14, EA;
LI 002: Tactical harness for use with closed and semi-closed circuit systems. The harness must have a plate holder system, with a molle system to adapt special equipment for amphibious use, with rebreather connections that allow front and rear connection. The harness must be a modular system to be able to adapt it to the different sizes of the operators. It must be equipped with patented quick-release buckles, guaranteeing quick release at any time. Its operation must be totally silent. It must allow the connection of several NEXUS or FASTEX buckles to allow direct integration of rescue vests or collars, such as SCORPION or others. Depending on the application requirements, it should be possible to select an upgrade with soft or hard ballistics. Ballistics in NATO standard size (300mm x 250mm) should fit on the front and rear panel and plates up to size 250mm x 120mm should fit on the sash. The front and rear covers should be designed as ONE SIZE FOR ALL. Underneath the back cover there should be tailoring loops to which the sash can be individually attached using the elastic cords for a snug and comfortable fit. It should not have integrated molded foam parts, this to achieve the lowest possible water absorption. The MOLLE system must be of international standard, so any other brand of luggage carrier or utility pocket will also fit your webbing system. Must be olive green in color. Material: CORDURA 1000D OXFORD. Weight: 1,100g (for larger sizes XL/XXL). Sizes: M / L - equivalent to EU 46-52 // XL / XXL - equivalent to EU 52-58 REFERENCE JMU-BP-03BK,https://www.sielnet.com/products/rebreathers/ or similar //, 14, EA;
LI 003: Compensator for use with semi-closed and half-closed circuit system, compensator type buoyant and Collar type lifejacket. Front Wing style design, it must have a Bladder protection cover made of KEVLAR and high density 1000D cordura abrasion resistant. Bladder made of Teflon which allows efficient hygiene and quick drying, It must have elastic adjustments through plastic D'rings, which decrease its volume, It must have protection cover color: Olive Green, Dimensions: Height 59 cm / Width 55 cm / Height 15 cm (with compensator inflated). Compensator must have an inflation system for buoyant control (a bottle of 0.5 lts / 200 bar / DIN), with a first state and low pressure hose and a system for emergency (a bottle of 0.5 lts / 200 bar / DIN). Compensator must have a corrugated trachea on the left side, with manual and automatic INT inflation nozzle. Compensator must have inter-leg straps, waist strap and system to connect directly to the molle system of the plate carrier harness, in case that configuration is required. Inner bladder volume of 20 liters. Compensator must be on the front of the operator, to allow the transport of dry backpacks or special equipment on the back. REFERENCE JMU-BC-14. https://www.sielnet.com/products/rebreathers/ or similar // Compensador para uso con sistema de circuito semicerrado y semicerrado Tipo compensador de boyantes y Salvavidas tipo Collar. Dise o estilo Ala frontal, Debe poseer una funda de protecci n del Bladder confeccionada en KEVLAR y cordura 1000D de alta densidad resistente a abrasi n. Bladder fabricado de tefl n lo que permite higiene eficiente y un secado r pido, Debe poseer el sticos de ajustes a trav s de D rings de pl stico, los cuales, disminuyen su volumen, Debe poseer color de funda de protecci n: Verde Oliva, Dimensiones: Alto 59 cm / Ancho 55 cm / Alto 15 cm (con compensador inflado). Compensador debe tener un sistema de inflado para control de boyantes (una botella de 0,5 lts/ 200 bar / DIN), con un primer estado y manguera de baja presi n y un sistema para emergencia (una botella de 0,5 lts / 200 bar / DIN). Compensador debe contar con una tr quea corrugada por costado izquierdo, con boquilla de inflado INT manual y autom tico. Compensador debe contar con correas de entre piernas, correa de cintura y sistema para conectar directo a sistema molle de arn s portaplaca, en caso de requerir sa configuraci n. Volumen de bejiga interior de 20 litros de volumen. Compensador debe quedar por parte frontal del operador, objeto permita el transporte de mochilas secas o equipo especial en la espalda. REFERENCIA JMU-BC-14. https://www.sielnet.com/products/rebreathers/ o similar, 14, EA;
LI 004: Oxygen O2 Booster System, must have the capacity for simultaneous charging of one to six cylinders. Must be activated by compressed air: use in open field without the need for electrical power. It must be able to be used in mobile or fixed mode. Must be easy to transport, must include watertight case with wheels, removable handle and control panel. It must use pressure differential transfer and double-acting pneumatic pumping with pressure control and variable pumping speed as working principles. It must be used to fill 100% oxygen gases and EANx (Nitrox) mixtures. Its maximum filling pressure must be self-limiting at 232 bar. It must allow to draw O2 from the source cylinder up to 25 bar. It must have a safety valve for adjustment to 255 bar. It must be able to operate at a temperature between -5 C +40 C. Its weight must not exceed 45 kilos. It must include training in correct use. It must have a technical service system available for online or telephone consultations, in Spanish language and representative in Colombia. With capacity of annual visit for programmed inspection. REFERENCES: BRO-P-08-23, KIT083, FRU076B, BRC-P-03, FRU075A. https://www.sielnet.com/products/rebreathers/ or similar //, 1, EA;
LI 005: Oxygen Analyzer, Device that allows to analyze O2 in percentages from or to 100, for use in nitrox mixtures. It must have a LCD type display for easy visualization. It must have visual and audible alarms. It must have automatic diagnostics with error codes to simplify troubleshooting. It must have a power supply with AA batteries and an autonomy of not less than 1,800 hours of use, before battery replacement. It must have an electrochemical type O2 sensor to provide better temperature tracking, superior long-term stability and accuracy. Must be capable of connection to any cylinder valve. Must include a high strength plastic carrying case. Must include silicone hose with 2 lt/min dispenser and gas chamber. Must include training in correct use. REFERENCE TKAN01019711405VDG https://www.cascoantiguo.com/es/tek/control-gas-y-analizadores/analizador-oxigeno-md300-vandagraph, or similar // Analizador de Oxigeno, Dispositivo que permita analizar O2 en porcentajes de o a 100, para uso en mezclas de nitrox. Debe poseer un display tipo LCD para facil visualizaci n. Debe poseer alarmas visuales y sonoras. Debe poseer diagnostico automatico con codigos de error para simplificar la resoluci n de problemas. Debe poseer fuente de alimentaci n con baterias AA y una autonomia no menor a 1,800 horas de uso, antes de cambio de baterias. Debe tener sensor de O2 de tipo electroqu mico para que brinde un mejor seguimiento de la temperatura, una estabilidad y precisi n superiores a largo plazo. Debe tener una capacidad de conexion a cualquier valvula de cilindro. Debe incluis caja de transporte, de plastico de alta resisitencia. Debe incluir manguera de silicona con dosificador de 2 lt/min y camara de gas. Debe incluir capacitaci n en correcto uso. REFERENCIA TKAN01019711405VDG. https://www.cascoantiguo.com/es/tek/control-gas-y-analizadores/analizador-oxigeno-md300-vandagraph, o similar, 3, EA;
LI 006: CO2 absorber, must have absorption capacity of 160gr CO2/Kg. Particle size between 1.0 mm to 2.5 mm. Must be military grade, for use in rebreathers. Must be packed in 20 kg drums. REFERENCE SBMP150704MPL. https://www.cascoantiguo.com/es/buceo/rebreathers-buceo/cal-sofnolime-25-5-mm-bidon-20-kg-molecular or similar // Absorbente de CO2, Debe tener capacidad de absorci n de 160gr CO2/Kg. Tama o de part cula entre 1.0 mm a 2.5 mm. Debe ser de grado militar, para uso en rebreathers. Debe estar empacado en bidones de 20 kilos. REFERENCIA SBMP150704MPL. https://www.cascoantiguo.com/es/buceo/rebreathers-buceo/cal-sofnolime-25-5-mm- bidon-20-kg-molecular, o similar, 112, EA;
LI 007: Underwater GPS system, must be compact and robust design. Made in black color. It must have a high resistance black polyurethane casing and tempered glass classified up to 200 meters depth. Its power supply must be with rechargeable AA or AA alkaline or lithium batteries, commercially replaceable by the user in the local market. It must have an autonomy greater than 35 hrs. It must have a TFT LCD transflective color screen of at least 2.2 inches. It must have a titanium butterfly support for DPV (scooter) mounting. Must have the ability to install a Bungee (elastic) attached for use on the wrist and integrated connector to install on navigation board. Must have navigation board with accurate rotating propeller to detect speed and distance through the water. It must have an underwater deployable digital buoy that allows connecting a team of divers equipped with underwater GPS to the surface. This buoy must have wireless connection with underwater GPS. It must have a low magnetic footprint. It must include software to upload GPS data to a computer. With wireless connection. It must include training in correct use. It must have technical service system available for online or telephone consultations, in Spanish language and representative in Colombia. With capacity of annual visit for scheduled inspection. REFERENCE 7300-00-A, PN7480-00, PN7467-00. https://www.sielnet.com/products/rebreathers/ or similar // Sistema de GPS Submarino, Debe ser compacto y de dise o robusto. Confeccionado en color negro. Debe poseer una carcasa de Poliuretano negro de alta resistencia y vidrio templado clasificado hasta 200 mts de profundidad. Su fuente de alimentaci n de ser con Bater as AA recargables o AA alcalina o de litio comercialmente reemplazable por el usuario en mercado local. Debe tener una autonom a mayor a 35 hrs. Debe tener Pantalla color transflectiva TFT LCD de m nimo 2,2 pulgadas. Debe poseer soporte de mariposa de titanio para montaje DPV (scooter). Debe poseer la capacidad de instalar un Bungee (el stico) adjunto para uso en la mu eca y conector integrado para instalar en tabla de navegaci n. Debe poseer tabla de navegaci n con h lice giratoria precisa para detectar velocidad y distancia a trav s del agua. Debe poseer boya digital desplegable subacu tica que permite conectar un equipo de buceadores equipados con GPS submarino con la superficie. Esta boya debe tener conexi n inal mbrica con GPS submarino. Debe ser de baja huella magn tica. Debe incluir software para cargar datos GPS a una computadora. Con Conexi n inal mbrica. Debe incluir capacitaci n en correcto uso. Debe poseer sistema de servicio t cnico disponible para consultas online o tel fono, en idioma espa ol y representante en Colombia. Con capacidad de visita anual para inspecci n programada. REFERENCIA 7300-00-A, PN7480-00, PN7467-00. https://www.sielnet.com/products/rebreathers/ o similar, 4, EA;
LI 008: Underwater navigation board, it must be no larger than 30.5 cm X 25.4 cm X 12.7 cm. Its weight should not exceed 600 grams. The material of the navigation board must be black ABS, non-skid. It must have adjustable chemical light type. It must have compass marks of 5 degrees. Must have minimum 6-hour illumination capability. The visible dimensions of the compass should be Diameter 8 cm / Height 9.5 cm. Compass must be of two hemispherical type magnets. Must include depth gauge with a brightness display, an oversized scale and a range of 0-60 m. Must include watch with shockproof case, oversized button for use with gloves, wide LCD display with backlight. Must include a carrying bag and wrist strap. Must include training in correct use. REFERENCES NMU-M-03, IMW-UW- 01, IMP-UW-02 https://www.sielnet.com/products/rebreathers/ or similar //, 10, EA;
LI 009: Underwater Scooter System, Must have a static thrust of 380 N / 85lbs. It must have a minimum working time of 340 min, at cruising speed, it must have a speed of 100 meters / minutes. It must have neutral buoyancy from 0 to 200 mts. It must have the capacity to give more than 12 kilometers at cruising speed. It must have adjustable speed and fixed propeller. It must include battery charger. It must have rechargeable lithium-ion battery and nominal voltage of 36 volts. It must include 2 military harness for towing and extraction operations from the water, by scooter and a tow line. It must have a connection platform for UW GPS system and for underwater navigation boards. Its weight must not exceed 30 kilos, battery included. Its manufacturing material must be made of aluminum for military use. It must be black in color. It must include a transport box. It must have bypass system, in case of problems with the command control. It must have a throttle lock. REFERENCE SX71571, SX70623, HSTE, NEROCSPK. https://www.sielnet.com/products/rebreathers/ or similar // Sistema de Scooter Submarino, Debe tener un empuje est tico de 380 N / 85lbs. Debe tener un tiempo de trabajo m nimo de 340 min, en velocidad crucero.Debe tener una velocidad de 100 metros / minutos. Debe tener boyantes neutra de 0 a 200 mts. Debe tener la capacidad de dar m s de 12 kil metros a velocidad crucero. Debe poseer velocidad ajustable y h lice fija. Debe incluir cargador de bater a. Debe poseer bater a Ion litio recargable y voltaje nominal de 36 volt. Debe incluir 2 arn s militar para remolque y operaciones de extracci n desde el agua, por scooter y una l nea de remolque. Debe poseer plataforma de conexi n para sistema GPS UW y para tablas de navegaci n submarina. Su peso no debe ser mayor a 30 kilos, bater a incluida. Su material de fabricaci n debe ser de Aluminio para uso militar. Debe ser de color negro. Debe incluir caja de transporte. Debe tener sistema de bypass, ante problemas con control de mando. Debe tener seguro de acelerador. REFERENCIA SX71571, SX70623, HSTE, NEROCSPK. https://www.sielnet.com/products/rebreathers/ o similar, 2, EA;
LI 010: VHF submarine communication system . The integrated diver voice communication system shall allow diver-to-diver and diver-to-surface voice communications with combined VHF radio and ultrasonic links. It must allow voice communication on the surface through VHF radio link. It must allow integration with underwater communication through ultrasonic acoustic link. It must allow a VHF range of up to 8,000 meters via radio link and 1,000 meters of underwater communication distance. It must have a laryngometer to be used with any type of mask (half or full face mask), and from the surface without a mask. Must allow earphones/laryngophones to operate with a half or full mask or without a mask on the surface. It must have a frequency range of 136 162 MHz. It must have 8 channels. Must have a RF output power of 1 to 6 watts. Must have a NI-MH battery with built-in recharge control circuit. Must have ability to program VHF frequencies. Must include training in correct use. Must include jacket for use with communications equipment Must have USB FREQUENCY PROGRAMMING KIT. It must allow configuring the different frequencies for use in military operations. Must have USB cable. Must have PC software. Must have transport and storage box. REFERENCES PN6884-00, PN6802-00, PN6755-33, PN6755-31, PN7241-00, JMU-I-02 or similar // Sistema de comunicaci n submarina VHF . El sistema integrado de comunicaci n de voz para buzos deber permitir las comunicaciones de voz de buceador a buceador y de buceador a superficie con enlaces combinados de radio VHF y ultras nicos. Debe permitir la comunicaci n de voz en la superficie a trav s de un enlace de radio VHF. Debe permitir la integraci n con la comunicaci n subacu tica a trav s del enlace ac stico ultras nico. Debe permitir un alcance VHF de hasta 8.000 metros por enlace de radio y 1.000 metros de distancia de comunicaci n submarina. Debe disponer de un laring metro para ser utilizado con cualquier tipo de m scara (media m scara o m scara completa), y desde la superficie sin m scara. Debe permitir que los auriculares/laring fonos funcionen con media m scara o m scara completa o sin m scara en la superficie. Debe tener un rango de frecuencia de 136 162 MHz. Debe tener 8 canales. Debe tener una potencia de salida de RF de 1 a 6 vatios. Debe tener una bater a NI-MH con circuito de control de recarga incorporado. Debe tener capacidad para programar frecuencias VHF. Debe incluir una formaci n para su correcta utilizaci n. Debe incluir chaqueta para su uso con equipos de comunicaciones Debe tener KIT DE PROGRAMACI N DE FRECUENCIAS USB. Debe permitir configurar las diferentes frecuencias para su uso en operaciones militares. Debe contar con cable USB. Debe tener software para PC. Debe tener caja de transporte y almacenamiento. REFERENCIAS PN6884-00, PN6802-00, PN6755-33, PN6755-31, PN7241-00, JMU-I-02 o similar, 4, EA;
LI 011: Submarine communication system of ultrasonic transceiver, The Ultrasonic Transceiver System shall have automatic electronic switching capability that allows the diver full control of underwater functions, Separate volume controls for audio reception and monitoring, Voice Activated (VOX) and Push to Talk ( PTT), 8 Multiple Channels and Heavy Duty Heavy Duty Housing, The ultrasonic transceivers system must have a nominal range of more than 1000 meters, It must have an acoustic output power: 5Watts (178.2 dB re 1 mPA at 1 meter), The audio frequency response should be in the range of 300-4000 Hz, Transmitter activation must be voice operated (VOX) or manual activation (PTT), Battery type: n 8 Alkaline Batteries or 12 V NiMH 10-cell AA (2800 mAh) rechargeable battery pack (included), Must have Piezoelectric type transducer, headphones, laryngometer and hood, Must be able to reach a maximum depth: 150m, Housing Dimensions: Height: 7.60 , Width: 3.55 , Depth: 1.80 , Low battery indication: red LED on the top case, Connector Type: Gold Plated Semi-Hard Naval Bronze Connectors. REFERENCES, PN7528-00-A, PN7200-00, PN6801- 00 or similar // Sistema de comunicaci n Submarina de transceptor ultrasonico, El Sistema de Tranceptors ultras nicos deben tener la capacidad de conmutaci n electr nica autom tica que permite al buceador un control total de las funciones bajo el agua, Controles de volumen separados para recepci n y monitoreo de audio, Activaci n por voz (VOX) y Pulsar para hablar (PTT), 8 Canales m ltiples y Carcaza rsistente para trabajo duro. El sistema de Tranceptors ultras nicos deben tener un alcance de M s de 1000 metros nominales. Debe tener una potencia de salida ac stica: 5Watts (178,2 dB re 1 mPA a 1 metro), Su respuesta de frecuencia de audio debe estar en el rango de 300-4000 Hz, La activaci n del transmisordebe ser operado por voz (VOX) o activaci n manual (PTT), Tipo de bater a: n 8 Pilas Alcalinas (no incluidas) o Paquete de bater a recargable de 12 V NiMH de 10 celdas AA (2800 mAh), Debe poseer transductor de tipo Piezoel ctrico, aud fonos, laring metro y caperuza, Debe ser capaz de alcanzar una profundidad m xima: 150m, Dimensiones de Housing : Alto: 7.60 , Ancho: 3.55 , Profundidad: 1.80 , Indicaci n de bater a baja: LED rojo en la carcasa superior, Tipo de conector:Conectores de bronce naval semiendurecidos, chapados en oro REFERENCIAS, PN7528-00-A, PN7200-00, PN6801-00, o similar, 14, EA;
LI 012: Submarine surface console system for VHF and underwater communications, Must have communications console that is for DUPLEX (dual) use with military operators, for UW and VHF communications,REFERENCE PN7527-00-A or similar // Sistema de consola submarina de superficie para comunicaciones VHF y subacu ticas, Debe poseer consola de comunicaciones que sea de uso DUPLEX( dual) con operadores militares, para comunicaciones UW y VHF REFERENCIA PN7527-00-A o similar, 1, EA;
LI 013: Accessory for secure communication. DIt must have a system that allows communication between two divers through the wired intercom. The wired budy line replaces the ordinary budy line which enables full duplex diver-to-diver underwater voice communication, thus avoiding location in military operations. REFERENCIA PN7466-00 or similar // Accesorio de comunicaci n Debe poseer un sistema que permita la comunicaci n entre dos buceadores a trav s del intercomunicador con cable. La l nea budy line por cable reemplaza la l nea budy line ordinaria que permite el d plex completo comunicaci n de voz submarina de buzo a buzo, lo que evita su localizaci n en operaciones militares.REFERENCIA PN7466-00 o similar, 4, EA;
LI 014: REGULATOR 1ST AND 2ND STAGE TAC BLACK DIN First stage machined from a block of marine brass that is chrome plated, and later we give it a trivalent treatment to increase its resistance to corrosion, Black finish, Pneumatically compensated diaphragm, DIN connector that can be used with pressures up to 300 bar (4350 psi), Adjustable intermediate pressure, Includes cold or polluted water kit as standard, 4 LP outlets (low pressure). One of them at the top of the rotating turret, 3/8", 2 HP outlets (high pressure), 7/16", Intermediate pressure at 9.7 +/- 0.35 bar (140 +/- 5 psi) 2ND STAGE REGULATOR TAC BLACK Second stage made of chrome-plated marine brass and thermoplastic that provide, Great strength and durability, Pneumatically compensated, Improved Lid Design, Heat exchanger that improves performance in cold waters, Easily replaceable mouthpiece for optimum fit, Venturi control to minimize entry into continuous flow, 80 cm Flex hose, MATTEBLACK REFERENCE TKTDRGTACBBDIN https://tdsdive.com/es/gas-reguladores-manometros-latiguillos-botellas-grifos-accesorios/202-regulador-tac-black.html or similar // REGULADOR 1RA Y 2DA ETAPA TAC BLACK DIN Primera etapa mecanizada a partir de un bloque de lat n marino que es cromado, Y posteriormente le damos un tratamiento trivalente para aumentar su resistencia a la corrosi n, Acabado en color negro, Membrana compensada neum ticamente, Conector DIN que puede utilizarse con presiones de hasta 300 bar (4350 psi), Presi n intermedia ajustable, Incorpora de serie kit de aguas fr as o contaminadas, 4 salidas de LP (baja presi n). Una de ellas en la parte superior de la torreta giratoria, de 3/8", 2 salidas HP (alta presi n), de 7/16", Presi n intermedia a 9,7 +/- 0,35 bar (140 +/- 5 psi) REGULADOR 2DA ETAPA TAC BLACK Segunda etapa fabricada en lat n marino cromado y termopl stico que le proporcionan una gran robustez y durabilidad, Compensada neum ticamente, Tapa con dise o mejorado, Intercambiador de calor que mejora el rendimiento en aguas fr as, Boquilla f cilmente sustituible para lograr un ajuste ptimo, Control Venturi para minimizar la entrada en flujo cont nuo Latiguillo Flex de 80 cm. COLOR NEGRO MATE https://tdsdive.com/es/gas-reguladores-manometros-latiguillos-botellas-grifos-accesorios/202-regulador-tac-black.html REFERENCIA TKTDRGTACBBDIN o similar, 22, EA;
LI 015: OCTOPUS TAC BLACK REGULATOR, High performance compensated second stage. MATTE BLACK, New cover redesigned to improve performance and appearance, Heat exchanger to improve performance in cold waters, Made of thermoplastic and chrome-plated marine brass that provide great durability, The mouthpiece is easily replaceable for optimum fit, Venturi control, BLACK hose 1 m long. REFERENCE TKTDRGOCTAC https://tdsdive.com/es/gas-reguladores-manometros-latiguillos-botellas-grifos-accesorios/257-octopus-proteus- 8435518901310.html or similar // REGULADOR OCTOPUS TAC BLACK Segunda etapa compensada de alto rendimiento. COLOR NEGRO MATE, Nueva cubierta redise ada para mejorar las prestaciones y su aspecto, Intercambiador de calor para mejorar el rendimiento en aguas fr as, Fabricado en termopl stico y lat n marino cromado que proporcionan una gran durabilidad, La boquilla es f cilmente sustituible para lograr un ajuste ptimo, Control Venturi, Latiguillo NEGRO de 1 m de longitud, https://tdsdive.com/es/gas-reguladores-manometros-latiguillos-botellas- grifos-accesorios/257-octopus-proteus-8435518901310.html REFERENCIA TKTDRGOCTAC o similar, 22, EA;
LI 016: MINI 3 CONSOLE MANOMETER + DEPTH METER + COMPASS, Pressure gauge up to 300 bar with red signaling in the reserve area (last 50 bar). Units: bars, Analog depth gauge up to 80 m with maximum depth indicator needle. Units: Meters, Analog compass located on the back with rotating bezel to mark directions, lateral reading window, faith line engraved on the dial and rose submerged in liquid. 80 cm long compact high pressure hose, black colour. REFERENCIA BRTDACCONMINI3 https://tdsdive.com/es/gas-reguladores-manometros-latiguillos-botellas-grifos-accesorios/269-consola-mini-3-manometro- profundimetro-brujula.html or similar // CONSOLA MINI 3 MANOMETRO +PROFUNDIMETRO +BR JULA Man metro de presi n hasta 300 bar con se alizaci n roja en la zona de reserva ( ltimos 50 bar). Unidades: bares, Profund metro anal gico hasta 80 m con aguja indicadora de profundidad m xima. Unidades: Metros, Compas anal gicos situado en la parte trasera con Bisel giratorio para marcar rumbos, ventana de lectura lateral, l nea de fe grabada sobre el dial y rosa sumergida en l quido, Latiguillo de alta presi n compact de 80 cm de longitud. https://tdsdive.com/es/gas-reguladores-manometros-latiguillos-botellas-grifos-accesorios/269-consola-mini-3-manometro- profundimetro-brujula.html REFERENCIA BRTDACCONMINI3 o similar, 22, EA;
LI 017: WING TECH 20 L. + STAINLESS STEEL BACKPLATE + HARNESS, Outer bag in CORDURA 1000. Easily replaceable inner tube in break-resistant polyurethane 210 radiofrequency welded, Air capacity: 20 liters, Push capacity: 40.47 lbs, Independent nylon elastics (available without elastics), Grommets for water drainage, Padded straps CORDURA 1000 adjustable by dipping with fastex, 3mm stainless steel plate, Padded plate cover, X01K inflator in technopolymer, 400 or 500 mm corrugated tube in TPE, Internal anti-stretch cable, Overpressure and discharge valves at the top and bottom. REFERENCE TKBC0101GT20DIRTDS https://www.cascoantiguo.com/es/tek/alas-y-jackets/ala-dsi-20-tech-back-plate-inox-arnes-tds or similar // ALA TECH 20 L. + BACKPLATE INOX + ARN S Bolsa exterior en CORDURA 1000, Tubo interior f cilmente reemplazable en poliuretano 210 resistente a la rotura soldado a radiofrecuencia, Capacidad de aire: 20 litros, Capacidad de empuje: 40.47 lbs, El sticos de nylon independientes (disponibles sin el sticos), Ojales para drenaje de agua, Tirantes acolchados CORDURA 1000 ajustables por inmersi n con fastex, Placa de acero inoxidable de 3 mm, Cubierta de placa acolchada, Inflador X01K en tecnopol mero, Tubo corrugado de 400 o 500 mm en TPE, Cable interno anti-estiramiento, V lvulas de sobrepresi n y descarga en la parte superior e inferior, https://www.cascoantiguo.com/es/tek/alas-y-jackets/ala-dsi-20- tech-back-plate-inox-arnes-tds REFERENCIA TKBC0101GT20DIRTDS o similar, 22, EA;
LI 018: DIVE COMPUTER NEON BLACK New system for navigating through the menus and entering parameters for maximum usability and intuitiveness. Remarkable ease of configuration, navigation through the different menus and access to the large amount of information that it provides in a very intuitive way, 12/24 hour clock with calendar and seconds, Precision stopwatch, Alarm clock, High-intensity backlight function (4000 Mlux, more than twice the highest lighting power computers to date) Indication of no-fly time and desaturation time, Low battery indicator, Metric or imperial units, User replaceable battery, MODO OFF para su uso en snorkeling/swimming LOG BOOK with historical memory of 50 dives per modality or 40 hours, Air, Nitrox (EAN), Gauge (Gauge) and Apnea (Free) modes, Very long battery life through a combination of systems: saving mode when the computer is not used with automatic start-up and a new low-consumption processor, CR2450 battery, Interface with connection to the dive computer simply supporting the computer and connection to the PC with USB cable. Software compatible with all versions of Windows and Mac, Depth gauge calibrated in salt water for maximum accuracy in the most common use, Possibility of deactivating DIVE functions to avoid unnecessary alarms during snorkeling or swimming, Must include spare strap REFERENCE CREORKS840055 https://www.cascoantiguo.com/es/buceo/ordenadores-relojes-buceo/ordenador-neon-negro-cressi or similar //, 36, EA;
LI 019: KUZE MONO DIVING WETSUIT 3 MM Ultra elastic neoprene in 3 mm, Inner lining in very warm towel, Fully heat sealed seams, Well-studied reinforcements on the knees, shoulders, elbows, seat and forearms in Supratex Anti-abrasion neoprene, Back and neck zipper for easy donning, Large built-in storage pocket on the right leg, Integral black color SIZE "L" AND "XL" REFERENCE TKVT06012KUZEMTDS https://tdsdive.com/es/vestimenta-trajes-ropa-interior-guantes-botas/204-230-mono-kuze-3-mm.html#/2-talla-m or similar // TRAJE DE BUCEO MONO KUZE 3 MM Neopreno ultra el stico en 3 mm, Forro interior en toalla muy c lido, Costuras completamente termoselladas, Refuerzos muy estudiados en rodillas, hombros, codos, culeras y antebrazos en neopreno Supratex Antiabrasi n. B40Cremallera dorsal y en el cuello para facilitar su puesta, Amplio bolsillo portaobjetos incorporado en la pierna derecha, Color negro integral, TALLA L Y XL https://tdsdive.com/es/vestimenta-trajes-ropa-interior-guantes-botas/204-230-mono-kuze-3-mm.html#/2-talla-m REFERENCIA TKVT06012KUZEMTDS o similar, 36, EA;
LI 020: LYCRA NEOSPORT SKIN SUIT BLACK Defense against sea lice, jellies, irritants, Anatomical cut pattern, unisex design, Form fit to reduce drag, Overlapping stitched seams, rolled edges, Internal pocket, Loop on cuffs and ankles, to prevent it from running when putting it on. REFERENCE BLRLMXSBK https://www.scuba.com/p-blrlm/neosport-by-henderson-spandex-skin-suit or similar // LYCRA NEOSPORT SKIN SUIT NEGRO Defensa contra piojos de mar, jaleas, irritantes. Patr n de corte anat mico, dise o unisex, Ajuste de forma para reducir el arrastre, Costuras cosidas superpuestas, bordes enrollados, Bolsillo interno, Presilla en pu os y tobillos, para evitar que se corra al colocarsela. https://www.scuba.com/p-blrlm/neosport-by-henderson-spandex-skin-suit REFERENCIA BLRLMXSBK o similar, 36, EA;
LI 021: SNORKEL PURGE FLEX , Its design allows use during the dive together with the regulator, Corrugated trachea in smooth silicone inside, to facilitate quick and comfortable emptying, Anti-waves at the top, B42Silicone mouthpiece, The lower part incorporates a membrane for a more comfortable emptying, Attachment clip for adjustable mask. REFERENCE BRTDTUPFLEXNG, https://www.cascoantiguo.com/es/buceo/tubos-buceo/tubo-purge-flex-tds or similar // SNORKEL PURGE FLEX Su dise o permite la utilizaci n durante la inmersi n conjuntamente con el regulador, Tr quea corrugada en silicona lisa en su interior, para facilitar un vaciado r pido c modo, Anti-olas en la parte superior, Boquilla de silicona, La parte inferior incorpora una membrana para un vaciado m s c modo, Clip de sujeci n para m scara regulable. https://www.cascoantiguo.com/es/buceo/tubos-buceo/tubo-purge-flex-tds REFERENCIA BRTDTUPFLEXNG o similar, 36, EA;
LI 022: FRAMELESSS SC BLACK MASK, Frameless single glass design with low profile, Wide peripheral vision, Soft type black silicone very durable over time, Secure and reinforced quick-adjust buckles, High gloss tempered glass, Facial design with a fit to a wide variety of faces. REFERENCE TKMA0101SCBTDS https://tdsdive.com/es/varios-aletas-mascaras-iluminacion-brujulas-corte-bolsas-aaccesorios/227-mascara-frameless-sc- 8435518916420.html or similar // M SCARA FRAMELESSS SC BLACK Dise o frameless de un solo cristal con perfil bajo, Amplia visi n perif rica, Silicona negra tipo Soft muy duradera en el tiempo, Hebillas de ajuste r pido seguras y reforzadas, Cristal templado de alto brillo, Dise o del facial con un ajuste a una amplia variedad de caras, https://tdsdive.com/es/varios-aletas-mascaras-iluminacion-brujulas-corte-bolsas-aaccesorios/227-mascara-frameless-sc- 8435518916420.html REFERENCIA TKMA0101SCBTDS o similar, 36, EA;
LI 023: ELITE DIVING BELT WITH FOUR POCKETS, Weight belt with pockets made of highly resistant 600 polyester, Quick release buckle in polished stainless steel, It must have 4 pockets and it must be possible to add more compartments, It must allow use with lead bags or pieces of conventional ballast, The pockets, the distribution and the ballast configuration must be very easy and fast, even under water, Overall Length: 146cm REFERENCE DIVZI0131 https://www.cascoantiguo.com/es/buceo/repuestos-accesorios-buceo/cinturon-elite-4-bolsillos-bestdivers or similar // CINTURON DE BUCEO ELITE CUATRO BOLSILLOS, Cintur n de lastre con bolsillos construido en polyester 600 de gran resistencia, Hebilla de zafado r pido en acero inoxidable pulido, Debe contar con 4 bolsillos y debe ser posible a adirle m s compartimentos, Debe permitir utilizar con sacos de plomo o piezas de lastre convencional, Los bolsillos, el reparto y configuraci n de lastre debe ser de manera muy f cil y r pida, incluso bajo el agua, Longitud total: 146 cm, https://www.cascoantiguo.com/es/buceo/repuestos-accesorios-buceo/cinturon-elite-4-bolsillos-bestdivers. REFERENCIA DIVZI0131 o similar, 36, EA;
LI 024: DIVING LEAD TABLET 2 POUNDS Black painted, Wide slots to easily pass the belt strap, Weight 1kg. REFERENCE BRTDSLP1KGNG , https://www.cascoantiguo.com/es/buceo/repuestos-accesorios-buceo/pastilla-plomo- 1-kg-pintado-tds or similar // PASTILLA DE PLOMO 2 LIBRAS Pastilla de plomo pintado decolor negro, Ranuras amplias para pasar facilmente la cincha del cintur n, Peso 1 kg, https://www.cascoantiguo.com/es/buceo/repuestos- accesorios-buceo/pastilla-plomo-1-kg-pintado-tds,REFERENCIA BRTDSLP1KGNG o similar, 220, EA;
LI 025: ALUMINUM BOTTLE S80 11.1 L + TAP / MATT BLACK COLOR, Dimensions: Diameter - 184.2 mm; Height - 658mm, Weight: 14.2kg, Buoyancy (in pounds): Full -1.6 ; Half load 2.8 ; Empty 4.1, Valve with DIN 200 connection, CE approved, Tap thread M 25x2 standard EN-144-1, Aluminum bottle of 11.1 liters (80 cubic feet), Made of 6061-T6 aluminum alloy, Color of the bottle MATT BLACK REFERENCE PKBRBOTALUS80 https://tdsdive.com/es/gas-reguladores-manometros-latiguillos-botellas-grifos-accesorios/98-botella-aluminio-s080-111-l- sgrifo-8435518915102.html or similar // BOTELLA ALUMINIO S80 11.1 L + GRIFO / DE COLOR NEGRO MATE Dimensiones: Di metro - 184,2 mm ; Altura - 658 mm, Peso: 14,2 kg, Flotabilidad (en libras): Llena -1,6 ; Media carga 2,8 ; Vac a 4,1, V lvula con conecci n DIN 200, Homologadas CE, Rosca del grifo M 25x2 norma EN-144- 1, Botella de Aluminio de 11,1 litros (80 pies c bicos) fabricada en aleaci n de aluminio 6061-T6, Color de la botella NEGRO MATE https://tdsdive.com/es/gas-reguladores-manometros-latiguillos-botellas-grifos-accesorios/98-botella-aluminio-s080-111-l- sgrifo-8435518915102.html REFERENCIA PKBRBOTALUS80 o similar, 32, EA;
LI 026: S80 ALUMINUM BOTTLE CULOTTE Special cap for S80 capacity aluminum cylinders, It must protect the bottom of the bottles from knocks and scratches, It must be black, It must be made of high-strength plastic. REFERENCE TKBO9999BT5TDS https://tdsdive.com/es/gas-reguladores-manometros-latiguillos-botellas-grifos-accesorios/123-culote-botella-aluminio- s80s63-8435518915522.html or similar // CULOTE BOTELLA ALUMINIO S80 Culote especial para botellas de aluminio de capacidades S80, Debe proteger el fondo de las botellas de golpes y roces, Debe ser de color negro, debe ser de pl stico de alta resistencia https://tdsdive.com/es/gas-reguladores-manometros-latiguillos-botellas-grifos-accesorios/123-culote-botella-aluminio- s80s63-8435518915522.html REFERENCIA TKBO9999BT5TDS o similar, 32, EA;
LI 027: STRONG TDS 6 MM DIVING BOOTS It must have an ultra-reinforced sole, Inside side zipper with anti-opening velcro tab, Rubber reinforcement on the instep, Rubber reinforcement on the heel with stopper for the fin strap, Extra resistant heavy duty sole, It should be 6mm, It must be black. REFERENCE BRTDESSTRONGL https://www.cascoantiguo.com/es/buceo/escarpines-botas-buceo-scuba/escarpin-elite-iii-6-mm-subacqua or similar // BOT N DE BUCEO STRONG TDS 6 MM Debe poseer suela ultrareforzada, Cremallera lateral en el interior con pesta a de velcro anti-apertura, Refuerzo de goma en el empine Refuerzo de goma en el tal n con tope para la tira de la aleta, Suela heavy duty extra resistente, Debe ser de 6 mm, Debe ser de color negro. https://www.cascoantiguo.com/es/buceo/escarpines-botas-buceo-scuba/escarpin-elite-iii-6-mm-subacqua REFERENCIA BRTDESSTRONGL o similar, 36, EA;
LI 028: OMAHA XTREM BOOT Adjustment laces, which run along the entire instep and velcro band, Rubber reinforced toe with large surface, Reinforced heel for fin adjustment, Non-slip flexible sole, with drainage holes, Strap on the heel for easy placement, Body with perforated fabric, which facilitates drainage, For use with wet suits, it must include a neoprene sock, Net transport bag, It must be black. REFERENCIA TKVTOMAHANW4041, https://www.cascoantiguo.com/es/tek/escarpines-y-botas-tecnico/bota-omaha- xtrem-tds or similar // BOTA OMAHA XTREM Cordones de ajuste, que recorren todo el empeine y banda de velcro, Puntera reforzada en goma con gran superficie, Refuerzo en tal n para ajuste aleta, Suela felxible antideslizante, con agujeros de drenaje, Tira en el tal n para f cil colocaci n, Cuerpo con tela perforada, que facilita el drenaje, Para uso con trajes h medos debe incluir calcet n de neopreno, Bolsa transporte de red, Debe ser de color negro. https://www.cascoantiguo.com/es/tek/escarpines-y-botas-tecnico/bota-omaha-xtrem-tds REFERENCIA TKVTOMAHANW4041 o similar, 14, EA;
LI 029: RK3 HD BLACK FINS Wide short blade to offer maximum propulsion and maintain great maneuverability, Vented blade design reduces drag on the upstroke and improves thrust on the downstroke, The vents also eliminate eddies that can occur along the back of the blade, just like split blade fins, The RK3 HD blade material is designed to withstand the harshest environments and temperatures, and the most demanding conditions, It has unique oversized eyelets that fit almost all carabiners, It must have straps with stainless steel springs, Its custom-design buckle keeps the spring-loaded straps in an optimal position, Screw and nut system similar to that of the Rocket fin straps. The screw is a little longer, Its simple snap-in design allows for easy replacement of springs if necessary, Material type thermoplasticized rubber, Full black colour. REFERENCE TKAL010162216APK https://www.cascoantiguo.com/es/tek/aletas-tek/aleta-rk3-hd-negra-apeks or similar // ALETA RK3 HD NEGRA Pala ancha corta para ofrecer una propulsi n m xima y mantener una gran maniobrabilidad, El dise o de pala ventilada reduce la resistencia en el movimiento ascendente y mejora el empuje en el descendente, Las rejillas de ventilaci n tambi n eliminan los remolinos que pueden producirse a lo largo de la parte de atr s de la pala, igual que lo hacen las aletas de pala partida, El material de la pala RK3 HD est dise ado para resistir en los entornos y temperaturas m s duros, y en las condiciones m s exigentes, Cuenta con unos exclusivos ojales de gran tama o en los que encajan casi todos los mosquetones, Debe poseer correas con muelles de acero inoxidable, Su hebilla de dise o a medida mantiene las correas con muelle en una posici n ptima, Sistema de tornillo y tuerca similar al de las correas de las aletas Rocket, El tornillo es un poco m s largo, Su sencillo dise o a presi n permite sustituir f cilmente los muelles en caso necesario, Tipo de material goma termoplastificada, Color negro completa. https://www.cascoantiguo.com/es/tek/aletas-tek/aleta-rk3-hd-negra-apeks, REFERENCIA TKAL010162216APK o similar, 36, EA;
LI 030: AP SELF-SEALING SURFACE MARKER BUOY WITH EASIFIL ADAPTER. Must Include SMBCI, Black Self- Sealing SMB, Must include AP35P Easifil - medium pressure inflation hose adapter Must include Inflation Cylinder Post with DIN Fitting N.B. The AP35P Easifil can be used with any brand of inflation hose, not just AP hoses, It must have an inflator stem without a locking slot, which prevents the hose from being attached to the SMB at any time during inflation, thus avoiding the danger of a surge in buoyancy to the diver, The hose should be connected only as long as the diver holds it in place, The SMBCi must also be able to inflate from a second stage air source through the self-sealing baffle on the bottom, It must be able to inflate throughout the dive or be used as a delayed action buoy, A dump/overpressure valve must prevent over-inflation and must allow deflation after use, The SMBCi must remain inflated out of the water allowing the diver to wave it to attract attention, It should be black and orange. REFERENCE TKBY0101APSMBCIBLDAP or similar // BOYA MARCADORA DE SUPERFICIE AUTOSELLANTE AP CON ADAPTADOR EASIFIL. Debe incluir SMBCI - SMB autosellante negro, Debe incluir AP35P Easifil - adaptador de manguera de inflado de media presi n, Debe incluir Poste de cilindro de inflado con ajuste DIN, N.B. El AP35P Easifil puede utilizarse con cualquier marca de manguera de inflado, no s lo con las mangueras AP, Debe tener un v stago de inflador sin ranura de bloqueo, lo que impide que la manguera se acople al SMB en cualquier momento durante el inflado y evitar as el peligro de un aumento repentino de la flotabilidad para el buceador, La manguera debe estar conectada s lo mientras el buceador la mantenga en su sitio, El SMBCi tambi n debe poder inflarse desde una fuente de aire de segunda etapa a trav s del deflector autosellante de la parte inferior, Debe poder inflarse durante toda la inmersi n o utilizarse como boya de acci n retardada, Una v lvula de descarga/sobrepresi n debe evitar el sobreinflado y debe permitir el desinflado despu s de su uso, El SMBCi debe permanecer inflado fuera del agua permitiendo que el buceador lo agite para llamar la atenci n, Debe ser de color negro y naranja. REFERENCIA TKBY0101APSMBCIBLDAP o similar, 22, EA;
LI 031: SPOOL BLACK REEL 30 M Spool type reel made of high resistance plastic, It must have a design in the lateral perforations that reduces weight and facilitates the hooking of the carabiner to retain the rope, It must incorporate 30 meters of high visibility orange thread, It must include a stainless steel double gate carabiner. REFERENCE TKCR0101SP02MRSTDS https://tdsdive.com/es/senalizacion-boyas-carretes-spool-pizarras/73-carrete-spool-black-30-m-8435518915355.html or similar // CARRETE SPOOL BLACK 30 M Carrete de tipo spool fabricado en pl stico de alta resistencia, Debe tener dise o en las perforaciones laterales que reduce el peso y facilita el enganche del mosquet n para retener el cabo, Debe incorporar 30 metros de hilo naranja de alta visibilidad, Debe incluir mosquet n doble de gatillo en acero inoxidable. https://tdsdive.com/es/senalizacion-boyas-carretes-spool-pizarras/73-carrete-spool-black-30-m-8435518915355.html REFERENCIA TKCR0101SP02MRSTDS o similar, 22, EA;
LI 032: KAVE SPOTLIGHT 1800 LUMEN RECHARGEABLE -Power: 10 W, Intensity: 1800 lumens, Beam Angle: 10 degrees, Color Temperature: 6500K, Projection: 100m, Autonomy: 90 min - 180 min - 360 min depending on mode, Must include Battery: Ion-Lithium 1 x 21700, Depth Range: 100m, Dimensions: Diameter: 41 mm / Length: 165 mm, Weight: 195 grams, Black body color, Robust anchor point at the rear, Anti-shock protective rubber ring for the head. Customizable with 3 additional colors (included), Double sealing O-ring. Must include 2 replacement gaskets, Must include USB battery charger, Must include wrist support with closure, It must include a sanity cover with a plastic zipper. REFERENCIA TKIL0101NE1800BTDS https://tdsdive.com/es/varios-aletas-mascaras-iluminacion-brujulas-corte-bolsas-aaccesorios/234-foco-kave-1800-lumen- recargable.html or similar // FOCO KAVE 1800 LUMEN RECARGABLE, Potencia: 10 W, Intensidad: 1800 l menes, ngulo del Haz: 10 grados, Temperatura de Color: 6500K, Proyecci n: 100 m, Autonom a: 90 min - 180 min - 360 min seg n modo, Debe incluir Bater a: Ion-Litio 1 x 21700, Rango de Profundidad: 100 m, Dimensiones: Di metro: 41 mm / Longitud: 165 mm, Peso: 195 grs, Color de cuerpo negro, Punto de anclaje robusto en su parte trasera, Aro de goma protector anti golpes del cabezal, Personalizable con 3 colores adicionales (incluidos), Doble junta t rica de cierre, Debe incluir 2 juntas de recambio, Debe incluir cargador de bater a USB, Debe incluir soporte de mu eca con cierre, Debe incluir funda de cordura con cremallera pl stica. https://tdsdive.com/es/varios-aletas-mascaras-iluminacion-brujulas-corte-bolsas-aaccesorios/234-foco-kave-1800-lumen- recargable.html REFERENCIA TKIL0101NE1800BTDS o similar, 36, EA;
LI 033: PREDATOR DIVING KNIFE, Desing Stiletto format, mixed serrated edge and dry edge. small volume, FASTENING SYSTEMS To the leg and forearm by means of two rubber straps, also to the waist passing the belt through a sheath, COLOR Black in its entirety, TOTAL LENGTH 18 centimeters. With handle included, LENGTH OF THE BLADE 8.6 centimeters, BLADE WIDTH 17 mm, BLADE MATERIAL AISI 420 steel (stainless steel) of the highest quality, HANDLE MATERIAL Soft Grip for a safe and efficient grip, SHEATH TYPE Rigid technopolymer sheath, with 2 rubber straps for installation on the leg or forearm, with connection. Includes installation straps on scuba gear. REFERENCE CREBRC554500 https://www.cressi.com/Catalogue/Details.asp?SchedaID=1104&CategoriaCOD=073 or similar // CUCHILLO DE BUCEO PREDATOR Dise o Formato estilete, de filo mixto dentado y filo seco. De volumen peque o, SISTEMAS DE SUJECI N A la pierna y antebrazo por dos correas de goma, tambi n a la cintura pasando cintur n por funda, COLOR Negro en su totalidad, LONGITUD TOTAL 18 cent metros. Con empu adura incluida, LONGITUD DE LA HOJA 8,6 cent metros, ANCHO DE LA HOJA 17 mm, MATERIAL DE HOJA Acero AISI 420 (acero inoxidable) de m xima calidad, MATERIAL DE EMPU ADURA Soft Grip para un agarre seguro y eficiente, TIPO FUNDA Funda r gida de tecnopol mero, con 2 correas de goma para instalaci n en pierna o ante brazo, con conexi n. Incluye correas de instalaci n en equipo de buceo. https://www.cressi.com/Catalogue/Details.asp?SchedaID=1104&CategoriaCOD=073 REFERENCIA CREBRC554500 o similar, 36, EA;
LI 034: PALMA AMARA GLOVE 2 MM / SIZE L 2 mm thick neoprene glove, You must have the palm of your hand in amara leather (water resistant) to achieve a better touch, It must have a velcro closure on the wrist, which facilitates the movement of putting on and taking off, Must be black. REFERENCE BRTDGUAMARAL https://www.cascoantiguo.com/es/buceo/guantes-buceo/guante-palma-amara-2-mm-tds or similar // GUANTE PALMA AMARA 2 MM / TALLA L Guante de neopreno de 2 mm de espesor, Debe tener la palma de la mano en piel amara (resistente al agua) para conseguir un mayor tacto, Debe tener cierre de velcro en la mu eca, que facilita el movimiento de poner y quitar, Debe ser de color negro. https://www.cascoantiguo.com/es/buceo/guantes-buceo/guante-palma-amara-2-mm-tds, REFERENCIA BRTDGUAMARAL o similar, 36, EA;
LI 035: 2MM DIVING HOOD, Super elastic 2 mm hood, It must have a skirt of 8 centimeters, Must be black. REFERENCE TECOC15701753 https://www.cascoantiguo.com/es/buceo/trajes-buceo/capucha-lavacore or similar // CAPUCHA DE BUCEO 2MM, Capucha super el stica de 2 mm,Debe poseer fald n de 8 cent metros, Debe ser de color negro. https://www.cascoantiguo.com/es/buceo/trajes-buceo/capucha-lavacore REFERENCIA TECOC15701753 o similar, 36, EA;
LI 036: GORILLA COMANDO DRY BAG PACK, It must be made of resistant PVC laminated Tarpaulin heat-welded by high frequency with a thickness of 5 tenths: practically 100% watertight and, therefore, very practical so as not to wet the trunk of the vehicle, It must have an adjustable reinforced harness, with 40mm straps, an adjustable chest strap and a ventral strap. Thermowelded padding, It must have two strong welded handles at each end, very useful for transport, especially when the bag is heavily loaded, and a handle-shoulder strap system with carabiners and particularly resistant accessories that allow very heavy loads. It must have a base with a 1.2mm thick thermo-welded reinforcement sheet to avoid perforations due to contact with incisive points on the floor. It must have a residual water drainage system located at one end. It is threadable and can be removed to quickly empty the bag. Availability of spare plugs, Its size (90cm x 38cm x 32cm) is ideal for a complete kit, adding even the longest diving or apnea fins, Must be black. REFERENCIA CREBUA925702 https://www.cascoantiguo.com/es/pesca-submarina/bolsas-cajas-pesca-submarina/bolsa- gorilla-comando-cressi or similar // BOLSA SECA GORILLA COMANDO, Debe ser de resistente PVC laminado Tarpaul n termosoldado mediante alta frecuencia de 5 d cimas de espesor: pr cticamente 100% estanca y, por lo tanto, muy pr ctica para no mojar el maletero del veh culo, Debe poseer arn s regulable reforzado, con trichas de 40mm., cincha pectoral regulabley cincha ventral, Acolchado termosoldado, Debe tener dos fuertes asas soldadas en cada extremo, muy tiles para su transporte, en especial cuando la bolsa est muy cargada, y un sistema de asa-bandolera con mosquetones y accesorios especialmente resistentes que permiten cargas muy importantes, Debe tener base con l mina de refuerzo termosoldada de 1,2mm de espesor para evitar perforaciones por contacto con puntos incisivos del suelo, Debe tener un sistema de desag e del agua residual situado en uno de los extremos. Es roscable y puede extraerse para vaciar r pidamente la bolsa. Disponibilidad de tapones de recambio. Su tama o (90cm x 38cm x 32cm) es id neo para un completo equipo a adiendo, incluso, las m s largas aletas de buceo o apnea. Debe ser de color negro., 36, EA;
LI 037: DIVING EQUIPMENT CARRYING CASE MOBY 5 115L. The bag must be fully adaptable to the spaces in which it must be stowed (vehicle trunk, boat, etc.). The central compartment must have an opening in "U" format, to access its content easily, It must have rounded side compartments so that the flaps open 2/3 of their length to improve accessibility. All the zippers must be YKK made of ABS, an element to be especially valued as a guarantee in terms of duration even with a treatment that is not particularly careful. It must have a reinforced and concealable telescopic trolley. The dorsal part of the bag must contain a rigid skeleton and the reinforced design of the lower area must guarantee that the backpack is kept in an upright position. It must have oversized "Trail" wheels for easy use also on uneven surfaces and stairs. The wheels must be removable and replaceable in case of breakage. It must have 2 external accessory compartments. Total volume: 115L, Weight: 4.5kg. Dimensions of the main opening: 76cm x 40cm x 28cm, Upper front pocket dimensions: 34cm x 23cm x 8.5cm, Lower front pocket dimensions: 34cm x 38cm x 8.5cm, Fin pocket dimensions: 73cm x 25cm x 7cm, REFERENCIA CREEUB93220013 https://www.cascoantiguo.com/es/buceo/bolsas-cajas-buceo/bolsa-mochila-moby-5- 115-l-cressi or similar // MALETA DE TRANSPORTE DE EQUIPO DE BUCEO MOBY 5 115L. La bolsa debe ser totalmente adaptable a los espacios en los que deber estibar (maletero del veh culo, embarcaci n, etc.). El compartimento central debe tener una apertura en formato U , para acceder a su contenido f cilmente. Debe poseer compartimentos laterales redondeados para que las aletas se abran las 2/3 partes de su longitud para mejorar la accesibilidad. Todas las cremalleras deben ser YKK de ABS, un elemento a valorar especialmente como garant a en cuanto a duraci n incluso con un tratamiento no especialmente esmerado. Debe tener trolley telesc pico reforzado y ocultable. La parte dorsal de la bolsa debe contener un esqueleto r gido y el dise o reforzado de la zona inferior debe garantizar que se mantenga la mochila en posici n vertical. Debe poseer ruedas sobredimensionadas Trail para un uso f cil tambi n en superficies irregulares y en escaleras. Las ruedas deben ser desmontables y sustituibles en caso de rotura. Debe disponer de 2 compartimentos exteriores porta accesorios. Volumen total: 115L, Peso: 4,5 kg. Dimensiones de la abertura principal:, 36, EA;
LI 038: REPLACEMENT STEEL SPRING FOR RK3 HD BLACK FINS Must be straps with stainless steel springs. It must be custom designed to keep the spring straps in an optimal position. Must have a screw and nut system to connect to the fin In your shooting area, you should have the spring wrapped in a black rubber handle. The connectors, between the fin and the spring, must be made of high-strength black plastic. https://www.cascoantiguo.com/es/tek/aletas-tek/aleta-rk3-hd-negra-apeks or similar // MUELLE DE ACERO DE REPUESTO PARA ALETAS RK3 HD NEGRA Deben ser correas con muelles de acero inoxidable. Debe ser de dise o a medida para mantener las correas con muelle en una posici n ptima. Debe poseer un sistema de tornillo y tuerca para conectar a la aleta. En su rea de tomada, debe tener el resorte envuelto en una manilla de goma de color negro. Los conectores, entre aleta y resorte, deben ser de pl stico de alta resistencia de color negro. https://www.cascoantiguo.com/es/tek/aletas-tek/aleta-rk3-hd-negra-apeks o similar, 4, EA;
LI 039: SYMMETRICAL AUTOMATIC CARABINER PETZL TRIACT LOCK / THREE SAFETY - Materials: aluminum, Certifications: CE EN 362, CE EN 12275 type B, Weight 75 g (Model M33 SL), SCREW-LOCK TRIACT- LOCK locking system, Resistance major axis 24 kN, Strength minor axis 10 kN, Open trigger resistance 7 kN, Opening 19mm, 3 Year Warranty, It must be symmetrical, to be used with insurers. It must offer efficiency, whatever the end of the carabiner that is closest to the device. It must be symmetrically oval, to be used with a pulley. It must have a Keylock system. MATTE BLACK COLOR. https://materialdeescalada.com/es/escalada-material-carabiners/3215-simmetrical- automatic-carabiner-petzl-ok-triact-lock-3342540815834.html#masinfo or similar // MOSQUETON SIMETRICO AUTOM TICO PETZL TRIACT LOCK / TRES SEGUROS Materiales: aluminio, Certificaciones: CE EN 362, CE EN 12275 type B, Peso 75 g (Modelo M33 SL), Sistema de bloqueo SCREW-LOCK TRIACT-LOCK, Resistencia eje mayor 24 kN, Resistencia eje menor 10 kN, Resistencia gatillo abierto 7 kN, Abertura 19 mm, Garant a 3 A os, Debe ser, 72, EA;
LI 040: CRESSI SILICONE GREASE 60 G It must be a silicone grease in a 60 g container for greasing elements that require it such as O-rings, sliders, metal elements, knives, etc. It must be in a 60 gr container with a screw cap. https://www.cascoantiguo.com/es/multi-accesorios/accesorios-comunes-mantenimiento/grasa-silicona-cre-60-g-cressi or similar // GRASA CRESSI SILICONA 60 G Debe ser una grasa de silicona en envase de 60 g para el engrase de elementos que lo precisen como juntas t ricas, cursores, elementos met licos, cuchillos, etc. Debe estar en un recipiente con tapa roscada de 60 gr. https://www.cascoantiguo.com/es/multi-accesorios/accesorios-comunes-mantenimiento/grasa- silicona-cre-60-g-cressi o similar, 10, EA;
LI 041: TDS REGULATOR NOZZLE Must be made of silicone. Must be black. Must include adjustment flange. https://www.cascoantiguo.com/es/buceo/repuestos-accesorios-buceo/boquilla-regulador-silicona-negra-tds or similar // BOQUILLA TDS REGULADOR Debe ser fabricada en silicona. Debe ser de color negro. Debe incluir brida de ajuste. https://www.cascoantiguo.com/es/buceo/repuestos-accesorios-buceo/boquilla-regulador-silicona-negra-tds o similar, 72, EA;
LI 042: ORINGS KIT 20 references of 12 units in the most used sizes in diving. Hardness 70 and 90, includes 3 bronze orings. Hardness 70 and 90. Must include 3 bronze orings. It must be a plastic container with interior divisions for the measurements of the orings. https://tdsdive.com/es/69-gas-reguladores-manometros-latiguillos-botellas-grifos- accesorios?page=3&q=GAS-ACCESORIOS-REGULADORES or similar // KIT DE ORINGS 20 referencias de 12 unidades en los tama os m s usados en buceo. De dureza 70 y 90, incluye 3 saca orings de bronce. De dureza 70 y 90. Debe incluir 3 saca orings de bronce. Debe ser un contenedor de pl stico con divisiones interiores para las medidas de orings. https://tdsdive.com/es/69-gas-reguladores-manometros-latiguillos-botellas-grifos-accesorios?page=3&q=GAS- ACCESORIOS-REGULADORES o similar, 2, EA;
LI 043: CRESSI NEOPRENE GLUE OF 30 grs BLACK COLOR, Special contact glue for neoprene. It must come in a container of 30 grams, with a lid. The color of the glue should be black. https://www.cascoantiguo.com/es/pesca-submarina/repuestos-accesorios-pesca-submarina/cola-neopreno-30-gr-cressi or similar // PEGAMENTO DE NEOPRENO CRESSI DE 30 grs COLOR NEGRO Pegamento de contacto especial para neopreno. Debe venir en un recipiente de 30 grs, con tapa. El color del pegamento debe ser de color negro. https://www.cascoantiguo.com/es/pesca-submarina/repuestos-accesorios-pesca-submarina/cola-neopreno-30-gr-cressi o similar, 20, EA;
LI 044: DIVING BOARD BOOK CASE PRO It must have a heavy-duty cover with side trims. Your inner notebook must have plastic rings and rigid covers. You must have a board with a box marked for run time. Must include a graphite pencil with rubber support. It must have a transparent inner pocket. It must have a transparent outer pocket for a run time tablet. It must have external fastening rubber bands. Must have a carabiner bungee mount. https://tdsdive.com/es/senalizacion- boyas-carretes-spool-pizarras/197-pizarra-libro-funda-pro-8435518916703.html or similar // PIZARRA LIBRO FUNDA PRO Debe poseer una funda de cordura de alto gramaje con ribetes laterales. Su libreta interior debe tener anillas de pl stico y tapas r gidas. Debe tener tablilla con cuadro marcado para run time. Debe incluir un l piz de grafito con soporte de goma. Debe tener un bolsillo interior transparente. Debe tener un bolsillo exterior transparente para tablilla run time. Debe tener gomas exteriores de sujeci n. Debe tener un soporte bungee para mosquet n. https://tdsdive.com/es/senalizacion-boyas-carretes-spool-pizarras/197-pizarra-libro-funda-pro-8435518916703.html o similar, 36, EA;
LI 045: DIVING WETSUIT HANGER Robust plastic hanger, to be used for drying diving suits, Color black, https://www.cascoantiguo.com/es/multi-accesorios/accesorios-trajes/percha-traje-tds or similar // PERCHA PARA TRAJE DE BUCEO Percha de pl stico robusto, para ser usado en secado de trajes de buceo, Color negro, https://www.cascoantiguo.com/es/multi-accesorios/accesorios-trajes/percha-traje-tds o similar, 40, EA;
LI 046: TDS HANGER FOR JACKET AND REGULATOR Must be of robust construction, It must be of a multipurpose concept and allow all the equipment to be hung together, Must have swivel hanging hook, It must have a socket to hang the diving regulator, It must have channels for the hoses, It must have hooks for diving boots and others, It must have accessories and recesses for the jacket's shoulder pads, preventing it from falling off, Must be black, https://www.cascoantiguo.com/es/multi-accesorios/accesorios-trajes/percha- multiusos-amarilla-tds or similar // PERCHA TDS PARA CHAQIETA Y REGULADOR Debe ser de construcci n robusta, Debe ser de concepto multiusos y que permita colgar todo el equipo junto, Debe contar con gancho para colgar giratorio, Debe poseer z calo para colgar el regulador de buceo, Debe tener canales para los latiguillos, Debe poseer ganchos para los botines de buceo y otros, Debe poseer complementos y rebajes para las hombreras del jacket evitando que este se caiga, Debe ser de color negro, https://www.cascoantiguo.com/es/multi-accesorios/accesorios-trajes/percha- multiusos-amarilla-tds. o similar., 25, EA;
LI 047: SURFACE MANOMETER DIN 200/300 FOR USE ON ALUMINUM CYLINDERS S80 Surface manometer for checking the pressure of cylinders outside the water. DIN connection system. Purge through knob. Easy-to-read dial. It must have a pressure gauge with rubber protection. Scale up to 400 bar. https://tdsdive.com/es/gas-reguladores- manometros-latiguillos-botellas-grifos-accesorios/159-manometro-superficie-din-200300-8435518916413.html or similar // MAN METRO SUPERFICIE DIN 200/300 PARA USO EN BOTELLAS DE ALUMINIO S80 Man metro de superficie para la comprobaci n de presi n de las botellas fuera del agua. Sistema de conexi n DIN. Purga mediante pomo. Dial de f cil lectura. Debe tener man metro con protecci n de goma. Escala hasta 400 bar. https://tdsdive.com/es/gas-reguladores-manometros-latiguillos-botellas-grifos-accesorios/159-manometro-superficie-din- 200300-8435518916413.html o similar, 3, EA;
LI 048: CERTIFIED NORTHEN DIVER WHISTLE Bright Orange Safety & Survival Whistle. Must be non-corrosive. It must emit a sharp sound that must be significantly louder than a conventional ball whistle. Must produce more than 100 decibels of sound to call for help in emergency and survival situations. Must be positively buoyant. Matte black. https://www.ndiver-rescue.com/peeless-whistle or similar // SILBATO NORTHEN DIVER CERTIFICADO Silbato de seguridad y supervivencia de color naranja brillante. Debe ser no corrosivo. Debe emitir un sonido agudo que debe ser significativamente m s alto que un silbato de bola convencional. Debe producir m s de 100 decibeles de sonido para solicitar ayuda en situaciones de emergencia y supervivencia. Debe ser de boyantes positiva. Color negro mate. https://www.ndiver-rescue.com/peeless-whistle o similar, 36, EA;
LI 049: 5 LTS BOTTLE OXIGENATION EQUIPMENT. It must work in two modes: 100% oxygen supply on demand or continuous supply with an adjustable flow rate of 0-24 liters per minute. It must have a 5 l bottle at a pressure of 200 bar (a total of 1000 l in capacity volume). It must have an integrated multifunction valve: on the one hand, it supplies oxygen continuously through an adjustable flow meter of 0-20 liters per minute through a mask with a reservoir. On the other hand, the bottle valve has a low pressure outlet that connects to a mask with an integral second stage and supplies 100% oxygen at the patient's request. The whole set is contained in a plastic container with the following dimensions: 800 x 160 cm and a total weight of 7.6 kg. https://www.cascoantiguopro.com/es/salvamento-rescate/oxigenoterapia/equipo- oxigenacion-botella-5-litros.html or similar // EQUIPO OXIGENACION BOTELLA 5 LTS.Debe funcionar en dos modalidades: suministro del 100% de ox geno a demanda o suministro continuo con un caudal regulable de 0-24 litros por minuto. Debe poseer una botella de 5 l a una presi n de 200 bar (un total de 1000 l en volumen de capacidad). Debe poseer una v lvula integrada multifunci n: por un lado suministra ox geno de manera contin a mediante un caudal metro regulable de 0-20 litros por minuto a trav s de una mascarilla con reservorio. Por el otro, la v lvula de la botella posee una salida de baja presi n que se conecta a una m scara con una segunda etapa integra y suministra ox geno al 100% a demanda del paciente. Todo el conjunto est contenido en un contenedor de pl stico con las siguientes dimensiones: 800 x 160 cm y un peso total de 7,6 kg. https://www.cascoantiguopro.com/es/salvamento-rescate/oxigenoterapia/equipo- oxigenacion-botella-5-litros.html o similar, 3, EA;
LI 050: MCH6 COMPRESSOR (ICON) BY COLTRIELECTRIC Breathing air compressor LOAD RATE: 80 L / min - 4.8 m3 / h - 2.8 CFM. FILLING TIME CYLINDER 10L 0-200BAR: 25 minutes. WORKING PRESSURE: 225 bar / 3300 psi. PUMPING UNIT RPM: 2240. DRIVEN BY: Single phase electric motor with centrifugal switch. POWER: 2.2 kW FULL LOAD AMPLIFIER: 14A (230V-50 / 60Hz) 29A (115V-60Hz). DIMENSIONS: height 35 cm / 13.7", width 65 cm / 25.5", depth 39 cm / 15.3". DRY WEIGHT: 39.5 kg / 87 lbs. NOISE PRESSURE: 81.7 dB. NUMBER OF STAGES AND CYLINDERS: 4. LUBRICANT OIL CAPACITY: 300 cc (0.3 L) / 10 FL OZ. LUBRICANT: Coltri CE 750 oil. FRAME: Powder coated steel. OIL / MOISTURE SEPARATOR: After the last stage with vortex generator. FILTRATION: Activated carbon filter cartridge and molecular sieve. SAFETY VALVE: In the separator housing 225- 300-330 Bar. INTERSTAGE COOLERS AND AFTER COOLERS: Stainless steel. SUCTION FILTER: 2 micron paper. AIR BREATHING: EN 12021 CGA E. https://www.cascoantiguo.com/es/compresores-buceo or similar // COMPRESOR MCH6 (ICON) DE COLTRIEL CTRICO Compresor de aire respirable TASA DE CARGA: 80 L / min - 4.8 m3 / h - 2.8 CFM. TIEMPO DE LLENADO CILINDRO 10L 0-200BAR: 25 minutos. PRESI N LABORAL: 225 bar / 3300 psi. UNIDAD DE BOMBEO DE RPM: 2240. CONDUCIDO POR: Motor el ctrico monof sico con, 2, EA;
LI 051: COLTRI MCH30 COMPRESSOR Breathing air compressor, three-phase electric motor for 550 L/min, 33 M2/hour. Must have a filling time of 4:30 in 80 cuft cylinders, Weight 445 kgs, Noise 78 Db, Must include aluminum monoblock, includes: automatic control of rotation direction, double hyperfilter system, oil pump, automatic condensation discharge, pressure gauge, thermostat, oil level control, automatic shutdown, pressure gauge in each stage, stainless steel intercoolers. Must include 4 filling valves type BC INT/DIN, hourmeter, safety valves after each stage in steel cabin with electrostatic painting. Must have 12021 certification. Power 11 Kw. Automatic purge system. Pressure switch with automatic stop. Electric panel with start/stop and emergency stop push buttons, as well as hour meter. Stage pressure manometer. Oil pressure control manometer. Thermostat with internal cabin temperature with automatic stop. Oil level control with automatic stop in case of lack of oil. https://www.cascoantiguo.com/es/compresores-buceo or similar // COMPRESOR MCH30 DE COLTRI Compresor de aire respirable, de motor el ctrico trif sico para 550 L/min, 33 M2/hora. Debe tener un tiempo de llenado 4:30 en cilindros de 80 cuft, Peso 445 kgs, Sonoridad de 78 Db, Debe incluir monobloque de aluminio, incluye: control autom tico de sentido de rotaci n, doble sistema de hiperfiltro, bomba de aceite, descarga de condensaci n autom tica, man metro, termostato, control nivel de aceite, apagado autom tico, man metro en cada etapa, intercoolers en acero inoxidable. Debe incluye 4 v vulas de llenado tipo BC INT/DIN, hor metro, v lvulas de seguridad despu s de cada etapa en cabina de acero con pintura electrost tica. Debe poseer certificaci n 12021. Potencia 11 Kw. Sistema de purgas autom ticas. Presostato con paro autom tico. Cuadro el ctrico con pulsadores de marcha/paro y paro de emergencia, adem s de cuenta horas. Man metro de presi n de etapas. Man metro de control de presi n de aceite. Termostato con temperatura interna de cabina con paro autom tico. Nivel de control de aceite con paro autom tico en caso da falta de aceite. https://www.cascoantiguo.com/es/compresores-buceo o similar, 1, EA;
LI 052: COMPRESSOR SEPARATOR FILTER Replacement cartridge for the air filtering system of MCH6 compressors, It must filter and purify the air using activated carbon. Must retain moisture through a molecular sieve. https://www.cascoantiguo.com/es/buceo/compresores-buceo/cartucho-filtro-carbon-para-mch6icon-coltri or similar // FILTRO SEPARADOR DE COMPRESOR Cartucho de recambio para el sistema de filtrado del aire de los compresores MCH6, Debe filtrar y purifica el aire mediante carb n activo. Debe retener la humedad mediante un tamiz molecular. https://www.cascoantiguo.com/es/buceo/compresores- buceo/cartucho-filtro-carbon-para-mch6icon-coltri o similar, 6, EA;
LI 053: MCH6 SUCTION FILTER CARTRIDGE Replacement of the filter cartridge for the air intake of MCH6 compressors. It must retain dust particles and small impurities from the environment. https://www.cascoantiguo.com/es/buceo/compresores-buceo/cartucho-filtro-aspiracion-mch6-coltri or similar // CARTUCHO FILTRO ASPIRACI N MCH6 Recambio del cartucho de filtrado, para la toma de aspiraci n de aire de los compresores MCH6, Debe retener part culas de polvo y peque as impurezas del ambiente. https://www.cascoantiguo.com/es/buceo/compresores-buceo/cartucho-filtro-aspiracion-mch6-coltri o similar, 10, EA;
LI 054: Compressor separator Hyperfilter filter, to purify the air, carbon monoxide, dioxide and moisture for MCH30 or similar // Filtro Hyperfiltro separador de compresor, para purificar el aire, de monoxido de carbono, bioxido y humedad para MCH30 o similar, 16, EA;
LI 055: AIR INTAKE FILTER FOR MCH30 COMPRESSOR Replacement of the filter cartridge, for the air intake intake of the MCH30 compressors. It must retain dust particles and small impurities from the environment. https://www.cascoantiguo.com/es/buceo/compresores-buceo/filtro-aspiracion-para-coltri-mch30-36-coltri or similar// FILTRO TOMA DE AIRE PARA COMPRESOR MCH30 Recambio del cartucho de filtrado, para la toma de aspiraci n de aire de los compresores MCH30. Debe retener part culas de polvo y peque as impurezas del ambiente. https://www.cascoantiguo.com/es/buceo/compresores-buceo/filtro-aspiracion-para-coltri-mch30-36-coltri o similar, 10, EA;
LI 056: Oil filter for MCH30 compressor. COLTRI or similar // Filtro de aceite para compresor MCH30. COLTRI o similar, 8, EA;
LI 057: SYNTHETIC COMPRESSOR OIL 1 LITER DRUM Must be in a 1 liter drum. COMPATIBILITY: Air - Nitrogen - Helium - CNG - Nitrox 40% O2. APPEARANCE (at 20oC): Light yellow liquid. It should make starting easier. You must be faster circulating at low temperature. Must operate throughout the year. You should reduce the heating. You must clean the compressor internally. It must provide a high resistance protective film. https://www.cascoantiguo.com/es/buceo/compresores-buceo/aceite-sintetico-compresor-bidon-1-litro-coltri or similar // ACEITE SINTETICO COMPRESOR BIDON 1 LITRO Debe estar en un bid n de 1 litro de capacidad. COMPATIBILIDAD: Aire - Nitr geno - Helio - CNG - Nitrox 40% O2. APARIENCIA (a 20oC): L quida amarillo claro. Debe facilita el arranque. Debes ser de circulaci n m s r pida a baja temperatura. Debe opera durante todo el a o. Debe reducir el calentamiento. Debe limpiar el compresor internamente. Debe proveer una pel cula protectora de alta, 22, EA;
LI 058: MILITARY DIVING DRY BACKPACK 40 LTS, Must be double layer. Inner layer waterproof, outer layer not impervious. The material of its inner layer must be made of very resistant rubber, which can be easily repaired like the tube of a wheel. Its volume should be 40 liters. The inner shell should be equipped with a corrugated hose incl. a nozzle like a BCD and a buoyancy inflator can be attached to allow the diver/swimmer to compensate for buoyancy or create maximum positive buoyancy. The outer shell hull must be made of CORDURA 1000den. It must have an inflation system: 0.5 lts/200bar bottle, first state and low pressure hose. It must have an integrated comfort harness system (shoulder straps for use as a backpack), which can be safely stored in a special compartment. No straps on the outside, e.g. during use as a lifting bag or during air travel. In addition, these bags are equipped with side pockets for attaching and storing buoyancy inflation cylinders or OXYGEN FIRST AID BAG, COLOR OLIVE GREEN, REFERENCE OL2307. http://www.outer-limits.at or similar // MOCHILA SECA DE 40 LTS PARA BUCEO MILITAR, Debe ser de doble capa. Capa interior impermeable, capa exterior no imperbeable. El material de su capa interior debe ser de goma muy resistente, que se puede reparar f cilmente como el tubo de una rueda. Su volumen debe ser de 40 litros. La capa interior debe estar equipada con una manguera corrugada incl. Se puede conectar una boquilla como la de un BCD y un inflador de flotabilidad para permitir que el buceador/nadador compense la flotabilidad o cree la m xima flotaci n positiva. El casco de la cubierta exterior debe estar fabricado en CORDURA 1000den. Debe poseer un sistema de inflado: botella de 0,5 lts/200bar, primer estado y manguera de baja presi n. Debe tener un sistema de arn s confort integrado (correas de hombros para uso como mochila), que se puede guardar de forma segura en un compartimento especial. Sin correas en el exterior, por ejemplo, durante el uso como bolsa elevadora o durante el viaje en avi n. Adem s, estas bolsas est n equipadas con bolsillos laterales para fijar y almacenar cilindros de inflado de flotabilidad o BOTIQU N DE PRIMEROS AUXILIOS DE OX GENO, COLOR VERDE OLIVA, REFERENCIA OL2307 o similar, 14, EA;
LI 059: DRY BAG FOR FRANCOTY RIFLE TRANSPORTATION Must have inner hull with gas-tight BDM metal zipper and additional protective zipper on outer hull. It must have a mouth inflation valve for buoyancy compensation. Dimensions: length 100 cm, height 45 cm / designed to carry a sniper rifle with its sight installed and stock folded down. Must have side retention straps. Must have carrying strap. Must have sliding glove size XL. It must be made of SOFTDURA Trilaminate for the inner shell. Its inner helmet must be made of flame retardant and moisture blocking textile. Color Olive Green REFERENCE OL2311F. http://www.outer-limits.at or similar // BOLSO SECO PARA TRANSPORTE DE FUSIL DE FRANCOTIRO Debe tener casco interior con cremallera met lica BDM herm tica al gas y cremallera de protecci n adicional en casco exterior. Debe poseer v lvula de inflado de boca para compensaci n de flotabilidad. Dimensiones: largo 100 cm, alto 45 cm / dise ada para transporte de fusil de francotirador con su mira instalada y culata rebatida. Debe poseer correas de retenci n laterales. Debe poseer correa de transporte. Debe poseer guante deslizante talla XL. Debe estar confeccionada en SOFTDURA Trilaminate para casco interior. Su casco interior debe estar fabricado en Textil ign fugo y bloqueador de humedad. Color Verde Oliva REFERENCIA OL2311F. http://www.outer-limits.at o similar, 4, EA;
LI 060: M4 RIFLE CARRYING DRY BAG WITH ACCESSORIES; Dimension Length: 950 mm, Width: 280 mm, Height: 100 mm, Weight: 1.450g, Outer shell construction with gas-tight BDM, metal zipper and additional, protective zipper, inner layer mouth inflation valve for buoyancy compensation, retention straps, carrying strap, Sliding glove size XL, SOFTDURA Trilaminate material for outer shell, Fire and moisture retardant, blocking fabric for inner shell. Color Olive Green. Art. No. OL-WP/SHT-RB. for M4 RIFLE and accessories. PART NUMBER OL2311 http://www.outer-limits.at or similar // BOLSO SECO PARA TRANSPORTE DE FUSIL M4 CON ACCESORIOS; Dimensi n Longitud: 950 mm, Ancho: 280 mm, Altura: 100 mm, Peso: 1.450g, Construcci n casco exterior con BDM herm tico al gas, cremallera met lica y adicional, cremallera de protecci n, capa interna v lvula de inflado de boca para compensaci n de flotabilidad, correas de retenci n, correa de transporte, Guante deslizante talla XL, Material SOFTDURA Trilaminado para casco exterior, Retardante de fuego y humedad, tejido bloqueador para casco interior. Color Verde Oliva. Arte. No. OL- WP/SHT-RB. para FUSIL M4 y accesorios. REFERENCIA OL2311 http://www.outer-limits.at o similar, 10, EA;
LI 061: SPECIAL OPERATIONS DRY BAG; Dimensions 45 x 25 x 20 cm. Construction: Double layer waterproof, waterproof inner layer. Zipper type: PU waterproof. Material type: CORDURA 1000 outer and SOFDURA 1000 Trilaminate inner. Oral inflation tube, with safety and MOLLE system in inner bag REFERENCE OL2312. Color: Olive Green. http://www.outer-limits.at or similar // BOLSO SECO DE ASALTO DE OPERACIONES ESPECIALES; Dimensiones 45 x 25 x 20 cm. Construcci n: Impermeable de doble capa, capa interior impermeable. Tipo de cremallera: Impermeable de PU. Tipo de material: CORDURA 1000 exterior y SOFDURA 1000 Trilaminada interior. Tubo de inflado oral, con seguro y con sistema MOLLE en bolso interior REFERENCIA OL2312. Color: Verde Oliva. http://www.outer-limits.at o similar, 14, EA;
LI 062: 150 LITERS DRY BACKPACK. DESIGN: Waterproof backpack for special forces operations. MATERIAL: Outer Cordura for hard work, inner trilaminate layer. COLOR: Black. DIMENSIONS: 80 X 55 X 55 centimeters. VOLUME: 150 liters waterproof / 3 x 3 liters non-waterproof (3 outer pockets). DRY CLOSING: 270o dry closing circumference in the upper segment of the bag with protective cover. EXTERNAL POCKETS 3 pockets for adjusting weights or additional equipment. CARRYING HANDLES 5 on front, back, top and bottom. 10 stainless steel "D" RINGS. VERTICAL ADJUSTMENT LACES on both sides. ADJUSTABLE HARNESS On shoulders and hips, with pads included. Compression straps to reduce volume if necessary. HARNESS STORAGE On the flap, for swimming sections. INFLATION VALVE Mouth type on top of backpack, for inflation or collapsing of internal volume. ACCESSORIES Tubular tow line. Length of 2 meters. MAINTENANCE KIT Dry seal lubricant, patches, glue. REFERENCE OL2302. http://www.outer-limits.at or similar // MOCHILA SECA DE 150 LITROS. DISE O: Mochila estanca para operaciones de fuerzas especiales. MATERIAL: Cordura exterior para trabajo duro, capa trilaminada interior. COLOR: Negro. DIMENSIONES: 80 X 55 X 55 cent metros. VOLUMEN: 150 litros resistente al agua / 3 x 3 litros no resistente al agua (3 bolsillos exteriores). CIERRE SECO: 270o circunferencia de cierre seco en el segmento superior de la bolsa con tapa protectora. BOLSILLOS EXTERIORES 3 bolsillos para pesos de ajuste o equipo adicional. ASAS DE TRANSPORTE 5 en parte delantera, trasera, superior e inferior. ANILLOS EN D 10 de acero inoxidable. CORDONES DE AJUSTE VERTICAL En ambos lados. ARN S AJUSTABLE En hombros y caderas, con almohadillas incluidas. CORREAS De compresi n para disminuir el volumen si es necesario. ALMACENAMIENTO DE ARN S En la solapa, para los tramos de nataci n V LVULA DE INFLADO Tipo bucal en parte superior de Mochila, para inflado o colapsado de volumen interno. ACCESORIOS L nea tubular para remolque. Largo de 2 metros.. KIT MANTENIMIENTO Lubricante para cierre seco, parches, pegamento. REFERENCIA OL2302. http://www.outer- limits.at o similar, 14, EA;
LI 063: MULTIPURPOSE DRY BAG. Dimensions 29 x 20 x 12 cm. Construction: Single-layer waterproof, laser-cut MOLLE system. Zipper type: PU waterproof. Type of material: SOFTDURA Trilaminate REFERENCE OL2305-2. Color: Olive Green. http://www.outer-limits.at or similar // BOLSO SECO MULTIPROP SITO. Dimensiones 29 x 20 x 12 cm. Construcci n: Impermeable de una sola capa, con sistema MOLLE con corte l ser. Tipo de cremallera: Impermeable de PU. Tipo de material: SOFTDURA Trilaminada REFERENCIA OL2305-2. Color: Verde Oliva. http://www.outer- limits.at o similar, 28, EA;
LI 064: MILITARY SPECIAL OPERATIONS LIFEJACKET. BLADDER MATERIAL: High frequency welded monocoque. SIZE: One size fits all. COLOR: Black. MATERIAL: Ballistic Nylon 420. TOTAL WEIGHT: 480 grs. without CO2 Bottle. VOLUME : 8 Liters. ABRASION RESISTANCE: > 20.000 MARTINDALE. UV RESISTANCE: 8 (WHERE THE MAXIMUM IN INTERNATIONAL STANDARDS REACHES 9). TYPE OF ACTIVATOR CO2 BOTTLE: UML PRO Manual Sensor. ALTERNATIVE INFLATION: Flexible hose with metal nozzle and spring-loaded safety thread for automatic shut-off. CO2 BOTTLE: Any between 36 grs and 60 grs / UNF 1/2" bottle thread. OVERPRESSURE VALVE: Compressed spring and manual when required by the operator. PLASTIC CLAMPS: 2 Nexus of 42 mm. MAXIMUM LIFTING CAPACITY: 120 N. REFERENCE OL2404. http://www.outer-limits.at or similar // SALVAVIDAS DE OPERACIONES ESPECIALES MILITAR. MATERIAL DE BLADDER: Monocasco soldado a alta frecuencia. TALLA: Talla nica. COLOR : Negro. MATERIAL: Nylon bal stico 420. PESO TOTAL: 480 grs. Sin Botella de CO2. VOLUMEN : 8 Litros. RESISTENCIA A LA ABRASI N: > A 20.000 MARTINDALE. RESISTENACIA UV : 8 (DONDE EL M XIMO EN EST NDARES INTERNACIONALES LLEGA A 9). TIPO DE ACTIVADOR BOTELLA DE CO2: UML PRO Sensor Manual. INFLACI N ALTERNATIVA : Manguera flexible con boquilla de metal y rosca de seguridad con resorte para cerrado autom tico. BOTELLA DE CO2: Cualquiera entre 36 grs y 60 grs / Hilo de botella UNF 1/2". V LVULA DE SOBREPRESI N: Resorte comprimido y manual cuando el operador lo requiera. BROCHES PL STICOS: 2 Nexus de 42 mm. M XIMA CAPACIDAD DE LEVANTE: 120 N. REFERENCIA OL2404. http://www.outer-limits.at o similar, 14, EA;
LI 065: QUADRENNIAL SERVICE KIT FOR MK4 CSC PRO SB (rebreather with our cylinder) Service kit for maintenance every 6 years, excluding cylinder. REFERENCIA SET036. https://www.sielnet.com/products/rebreathers or similar // KIT DE SERVICIO CUADRENAL PARA MK4 CSC PRO SB (rebreather con nuestro cilindro) Kit de servicio para el mantenimiento cada 6 a os, excluyendo el cilindro. REFERENCIA SET036. https://www.sielnet.com/products/rebreathers o similar, 14, EA;
LI 066: QUADRENNIAL SERVICE KIT VALVE WITH M25X2 THREAD. REFERENCE SET068. https://www.sielnet.com/products/rebreathers or similar // Kit de servicio para mantenimiento de v lvula de cilindro. REFERENCIA SET068. https://www.sielnet.com/products/rebreathers o similar, 14, EA;
LI 067: COMPLETE SPARE PARTS FOR CORRECTIVE MAINTENANCE. Recommended for 6 years, out of 14 units of Caimano MK4 CSC rebreathers. https://www.sielnet.com/products/rebreathers or similar // PIEZAS COMPLETA DE REPUESTO PARA MANTENIMIENTO CORRECTIVO. Recomendado para 6 a os, de 14 unidades de rebreathers Caimano MK4 CSC. https://www.sielnet.com/products/rebreathers o similar, 1, EA;
LI 068: MK4 CSC STANDARD TOOLS KIT. for 6 years of 14 rebreathers. REFERENCE KIT068A. https://www.sielnet.com/products/rebreathers or similar // Kit de herramientas est ndar para MK4 CSC, para 6 a os de 14 rebreathers. REFERENCIA KIT068A. https://www.sielnet.com/products/rebreathers/ MK4 CSC STANDARD TOOLS KIT o similar, 3, EA;
LI 069: MK4 CSC CUSTOM TOOLS KIT. REFERENCE KIT068B. https://www.sielnet.com/products/rebreathers or similar // Kit de herramientas personalizadas para MK4 CSC. REFERENCIA KIT068B. https://www.sielnet.com/products/rebreathers/ MK4 CSC CUSTOM TOOLS KIT o similar, 3, EA;
LI 070: MK4 CDV/CSC & MK1 TEST SET. REFERENCE KIT018. https://www.sielnet.com/products/rebreathers or similar // Conjunto de prueba para MK4 CDV/CSC & MK1 REFERENCIA KIT018. https://www.sielnet.com/products/rebreathers/ MK4 CDV/CSC & MK1 TEST SET o similar, 1, EA;
LI 071: 200mbar PRESSURE GAUGE WITH JOINT MK4. REFERENCE MAN033. https://www.sielnet.com/products/rebreathers or similar // MANOMETRO 200mbar CON JUNTA para MK4 https://www.sielnet.com/products/rebreathers/ 200mbar PRESSURE GAUGE WITH JOINT. REFERENCIA MAN033 o similar, 1, EA;
LI 072: 300bar PRESSURE GAUGE WITH PURGE MK4 REFERENCEMAN034CF or similar // MANOMETRO 300bar CON PURGA para MK4 REFERENCEMAN034CF https://www.sielnet.com/products/rebreathers o similar, 1, EA;
LI 073: MP TEST KIT MK4 (Medium Pressure). REFERENCE MAN035CF. https://www.sielnet.com/products/rebreathers or similar // KIT DE PRUEBA MP MK4 (presi n media) REFERENCIA MAN035CF. https://www.sielnet.com/products/rebreathers o similar, 1, EA;
Solicitation and Buy Attachments
***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***
For this solicitation, DOS International Narcotics Law Enforcement Affairs - Department of State intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. DOS International Narcotics Law Enforcement Affairs - Department of State is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or make a bid on https://marketplace.unisonglobal.com. Offerors that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Offerors that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerors may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith bids, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process. Should offerors require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.
If this is a Brand Name Only procurement, Seller certifies that it is an authorized distributer of the brand name product being sold to the Department of State and that it has the certification/specialization level required by the manufacturer, to support both the product sale and product pricing, in accordance with applicable manufacturer certification/specialization requirements. Unless otherwise specified, Seller warrants that the products are new and in their original box(es).
In addition to providing pricing at www.UnisonMarketplace.com for this solicitation, each Offeror must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) so that they are received no later than the closing date and time for this solicitation; these shall be uploaded with the Offeror's bid via Unison Marketplace.
This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to FAR 4.1102 and other applicable regulations and guidelines. Information can be found at www.sam.gov. Registration must be "ACTIVE" at the time of award.
All Bids must be valid for 30 days from the closing date for this solicitation. No exceptions or qualifications.
New equipment ONLY, NO grey market or refurbished products. Items must be in original packaging, never used, and not altered in any way. Components of the requested equipment, to include memory, must be manufacturer-approved and may not be compatible, remanufactured, or refurbished equipment. All items must be covered by manufacturer's warranty and procured through a manufacturer approved distribution channel. Sellers must be able to document their ability to provide items through manufacturer approved distribution channels upon request. The Seller confirms to have sourced all products submitted in this Bid from manufacturer-approved channels for Federal sales, in accordance with all applicable laws and manufacturer's current applicable policies at the time of purchase. Seller must be able to support both the product sale and product pricing, in accordance with applicable manufacturer certification / specialization requirements. If software is provided or included, Seller shall, upon request, provide Buyer with a copy of the End User License Agreement. Seller certifies that all software is licensed originally to Buyer as the original licensee authorized to use the software.
All bid prices must include shipping FOB Destination. No partial shipments are permitted, unless otherwise specified by Contracting Officer at time of award.
To be considered for award, all Sellers must be manufacturer federally authorized distributors/resellers of the equipment/services they are offering with a demonstrated capability of delivering the entire order within the timeframes specified by the Buyer on the award. Sellers shall be required to provide documentation as proof of authorization to be considered for award.
The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument in the provision at 52.204-26, Covered Telecommunications Equipment or Services Representation, or in paragraph (v) of the provision at 52.212-3, Offeror Representations and Certifications-Commercial Items. (a) Definitions. As used in this provision Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (b) Prohibition. (1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to (i)Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or (ii)Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.
(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. Nothing in the prohibition shall be construed to (i)Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or (ii)Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles. (c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for covered telecommunications equipment or services .
(d) Representation. The Offeror represents that (1)It will, will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. The Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds will in paragraph (d)(1) of this section; and (2)After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that It does, does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services. The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds does in paragraph (d)(2) of this section. (e) Disclosures. (1) Disclosure for the representation in paragraph (d)(1) of this provision. If the Offeror has responded will in the representation in paragraph (d)(1) of this provision, the Offeror shall provide the following information as part of the offer:
(i)For covered equipment (A)The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known); (B)A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and (C)Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision. (ii)For covered services (A)If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or (B)If not associated with maintenance, the Product Service Code (PSC) of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision. (2) Disclosure for the representation in paragraph (d)(2) of this provision. If the Offeror has responded does in the representation in paragraph (d)(2) of this provision, the Offeror shall provide the following information as part of the offer: (i)For covered equipment (A)The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known); (B)A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and (C)Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision. (ii)For covered services (A)If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or (B)If not associated with maintenance, the PSC of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision. (End of provision)
(a) Definitions. As used in this clause Backhaul means intermediate links between the core network, or backbone network, and the small subnetworks at the edge of the network (e.g., connecting cell phones/towers to the core telephone network). Backhaul can be wireless (e.g., microwave) or wired (e.g., fiber optic, coaxial cable, Ethernet). Covered foreign country means The People's Republic of China. Covered telecommunications equipment or services means (1) Telecommunications equipment produced by Huawei Technologies Company or ZTE Corporation (or any subsidiary or affiliate of such entities); (2) For the purpose of public safety, security of Government facilities, physical security surveillance of critical infrastructure, and other national security purposes, video surveillance and telecommunications equipment produced by Hytera Communications Corporation, Hangzhou Hikvision Digital Technology Company, or Dahua Technology Company (or any subsidiary or affiliate of such entities); (3) Telecommunications or video surveillance services provided by such entities or using such equipment; or (4) Telecommunications or video surveillance equipment or services produced or provided by an entity that the Secretary of Defense, in consultation with the Director of National Intelligence or the Director of the Federal Bureau of Investigation, reasonably believes to be an entity owned or controlled by, or otherwise connected to, the government of a covered foreign country. Critical technology means (1) Defense articles or defense services included on the United States Munitions List set forth in the International Traffic in Arms Regulations under subchapter M of chapter I of title 22, Code of Federal Regulations; (2) Items included on the Commerce Control List set forth in Supplement No. 1 to part 774 of the Export Administration Regulations under subchapter C of chapter VII of title 15, Code of Federal Regulations, and controlled- (i) Pursuant to multilateral regimes, including for reasons relating to national security, chemical and biological weapons proliferation, nuclear nonproliferation, or missile technology; or (ii) For reasons relating to regional stability or surreptitious listening; (3) Specially designed and prepared nuclear equipment, parts and components, materials, software, and technology covered by part 810 of title 10, Code of Federal Regulations (relating to assistance to foreign atomic energy activities); (4) Nuclear facilities, equipment, and material covered by part 110 of title 10, Code of Federal Regulations (relating to export and import of nuclear equipment and material); (5) Select agents and toxins covered by part 331 of title 7, Code of Federal Regulations, part 121 of title 9 of such Code, or part 73 of title 42 of such Code; or (6) Emerging and foundational technologies controlled pursuant to section 1758 of the Export Control Reform Act of 2018 (50 U.S.C. 4817).
Interconnection arrangements means arrangements governing the physical connection of two or more networks to allow the use of another's network to hand off traffic where it is ultimately delivered (e.g., connection of a customer of telephone provider A to a customer of telephone company B) or sharing data and other information resources. Reasonable inquiry means an inquiry designed to uncover any information in the entity's possession about the identity of the producer or provider of covered telecommunications equipment or services used by the entity that excludes the need to include an internal or third-party audit. Roaming means cellular communications services (e.g., voice, video, data) received from a visited network when unable to connect to the facilities of the home network either because signal coverage is too weak or because traffic is too high. Substantial or essential component means any component necessary for the proper function or performance of a piece of equipment, system, or service. (b) Prohibition. (1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. The Contractor is prohibited from providing to the Government any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system, unless an exception at paragraph (c) of this clause applies or the covered telecommunication equipment or services are covered by a waiver described in FAR 4.2104. (2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract, or extending or renewing a contract, with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system, unless an exception at paragraph (c) of this clause applies or the covered telecommunication equipment or services are covered by a waiver described in FAR 4.2104. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract.
c) Exceptions. This clause does not prohibit contractors from providing (1) A service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or (2) Telecommunications equipment that cannot route or redirect user data traffic or permit visibility into any user data or packets that such equipment transmits or otherwise handles. (d) Reporting requirement. (1) In the event the Contractor identifies covered telecommunications equipment or services used as a substantial or essential component of any system, or as critical technology as part of any system, during contract performance, or the Contractor is notified of such by a subcontractor at any tier or by any other source, the Contractor shall report the information in paragraph (d)(2) of this clause to the Contracting Officer, unless elsewhere in this contract are established procedures for reporting the information; in the case of the Department of Defense, the Contractor shall report to the website at https://dibnet.dod.mil. For indefinite delivery contracts, the Contractor shall report to the Contracting Officer for the indefinite delivery contract and the Contracting Officer(s) for any affected order or, in the case of the Department of Defense, identify both the indefinite delivery contract and any affected orders in the report provided at https://dibnet.dod.mil. (2) The Contractor shall report the following information pursuant to paragraph (d)(1) of this clause (i) Within one business day from the date of such identification or notification: the contract number; the order number(s), if applicable; supplier name; supplier unique entity identifier (if known); supplier Commercial and Government Entity (CAGE) code (if known); brand; model number (original equipment manufacturer number, manufacturer part number, or wholesaler number); item description; and any readily available information about mitigation actions undertaken or recommended. (ii) Within 10 business days of submitting the information in paragraph (d)(2)(i) of this clause: any further available information about mitigation actions undertaken or recommended. In addition, the Contractor shall describe the efforts it undertook to prevent use or submission of covered telecommunications equipment or services, and any additional efforts that will be incorporated to prevent future use or submission of covered telecommunications equipment or services. (e) Subcontracts. The Contractor shall insert the substance of this clause, including this paragraph (e) and excluding paragraph (b)(2), in all subcontracts and other contractual instruments, including subcontracts for the acquisition of commercial items. (End of clause)
To be considered for award, all vendors submitting bids for this requirement must self-certify conformance in their SAM.gov representations as required in FAR 52.204-24, FAR 52.204-25 and FAR 52.204-26 in accordance with FAR Interim Rule 2019-009. Vendors that fail to complete this self-certification or present with a record that does not reflect conformance at FAR 52.204-26 and FAR 52.212-3 (v) within SAM.gov will not be considered for award.
(a) Definitions. As used in this provision, covered telecommunications equipment or services has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (b) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for covered telecommunications equipment or services . (c) Representation. The Offeror represents that it does, does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument.
(a) The Department of State's Advocate for Competition is responsible for assisting industry in removing restrictive requirements from Department of State solicitations and removing barriers to full and open competition and use of commercial items. If such a solicitation is considered competitively restrictive or does not appear properly conducive to competition and commercial practices, potential offerors are encouraged first to contact the contracting officer for the solicitation. If concerns remain unresolved, contact:
(a) Definitions. As used in this provision: Foreign person means any person other than a United States person as defined below. United States person means any United States resident or national (other than an individual resident outside the United States and employed by other than a United States person), any domestic concern (including any permanent domestic establishment of any foreign concern), and any foreign subsidiary or affiliate (including any permanent foreign establishment) of any domestic concern which is controlled in fact by such domestic concern, as provided under the Export Administration Act of 1979, as amended. (b) Certification. By submitting this offer, the offeror certifies that it is not: (1) Taking or knowingly agreeing to take any action, with respect to the boycott of Israel by Arab League countries, which Section 8(a) of the Export Administration Act of 1979, as amended (50 U.S.C. 2407(a)) prohibits a United States person from taking; or, (2) Discriminating in the award of subcontracts on the basis of religion. (End of provision)
All offers/bids submitted in response to this solicitation must address the approach for completing the security plan and certification and accreditation requirements as required by the clause at 652.239-71, Security Requirements for Unclassified Information Technology Resources. (End of provision)
(a) General. The Contractor shall be responsible for information technology (IT) security, based on Department of State (DOS) risk assessments, for all systems connected to a Department of State (DOS) network or operated by the Contractor for DOS, regardless of location. This clause is applicable to all or any part of the contract that includes information technology resources or services in which the Contractor has physical or electronic access to DOS's information that directly supports the mission of DOS. The term information technology , as used in this clause, means any equipment, including telecommunications equipment, that is used in the automatic acquisition, storage, manipulation, management, movement, control, display, switching, interchange, transmission, or reception of data or information. This includes both major applications and general support systems as defined by OMB Circular A-130. Examples of tasks that require security provisions include: (1) Hosting of DOS e-Government sites or other IT operations; (2) Acquisition, transmission or analysis of data owned by DOS with significant replacement cost should the Contractor's copy be corrupted; and (3) Access to DOS general support systems/major applications at a level beyond that granted the general public; e.g., bypassing a firewall. (b) IT Security Plan. The Contractor shall develop, provide, implement, and maintain an IT Security Plan. This plan shall describe the processes and procedures that will be followed to ensure appropriate security of IT resources that are developed, processed, or used under this contract. The plan shall describe those parts of the contract to which this clause applies. The Contractor's IT Security Plan shall comply with applicable Federal laws that include, but are not limited to, 40 U.S.C. 11331, the Federal Information Security Management Act (FISMA) of 2002, and the E-Government Act of 2002. The plan shall meet IT security requirements in accordance with Federal and DOS policies and procedures, as they may be amended from time to time during the term of this contract that include, but are not limited to: (1) OMB Circular A-130, Management of Federal Information Resources, Appendix III, Security of Federal Automated Information Resources; (2) National Institute of Standards and Technology (NIST) Guidelines (see NIST Special Publication 800-37, Guide for the Security Certification and Accreditation of Federal Information Technology Systems (http://csrc.nist.gov/publications/nistpubs/800-37/SP800-37-final.pdf)); and (3) Department of State information security sections of the Foreign Affairs Manual (FAM) and Foreign Affairs Handbook (FAH) (http://foia.state.gov/Regs/Search.asp), specifically: (i) 12 FAM 230, Personnel Security; (ii) 12 FAM 500, Information Security (sections 540, 570, and 590); (iii) 12 FAM 600, Information Security Technology (section 620, and portions of 650); (iv) 5 FAM 1060, Information Assurance Management; and (v) 5 FAH 11, Information Assurance Handbook.
(c) Submittal of IT Security Plan. Within 30 days after contract award, the Contractor shall submit the IT Security Plan to the Contracting Officer and Contracting Officer's Representative (COR) for acceptance. This plan shall be consistent with and further detail the approach contained in the contractor's proposal or sealed bid that resulted in the award of this contract and in compliance with the requirements stated in this clause. The plan, as accepted by the Contracting Officer and COR, shall be incorporated into the contract as a compliance document. The Contractor shall comply with the accepted plan. (d) Accreditation. Within six (6) months after contract award, the Contractor shall submit written proof of IT security accreditation for acceptance by the Contracting Officer. Such written proof may be furnished either by the Contractor or by a third party. Accreditation must be in accordance with NIST Special Publication 800-37. This accreditation will include a final security plan, risk assessment, security test and evaluation, and disaster recovery plan/continuity of operations plan. This accreditation, when accepted by the Contracting Officer, shall be incorporated into the contract as a compliance document, and shall include a final security plan, a risk assessment, security test and evaluation, and disaster recovery/continuity of operations plan. The Contractor shall comply with the accepted accreditation documentation. (e) Annual verification. On an annual basis, the Contractor shall submit verification to the Contracting Officer that the IT Security Plan remains valid. (f) Warning notices. The Contractor shall ensure that the following banners are displayed on all DOS systems (both public and private) operated by the Contractor prior to allowing anyone access to the system
SECTION 8(A) OF THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED (AUG 1999) (a) Section 8(a) of the U.S. Export Administration Act of 1979, as amended (50 U.S.C. 2407(a)), prohibits compliance by U.S. persons with any boycott fostered by a foreign country against a country which is friendly to the United States and which is not itself the object of any form of boycott pursuant to United States law or regulation. The Boycott of Israel by Arab League countries is such a boycott, and therefore, the following actions, if taken with intent to comply with, further, or support the Arab League Boycott of Israel, are prohibited activities under the Export Administration Act: (1) Refusing, or requiring any U.S. person to refuse to do business with or in Israel, with any Israeli concern, or with any national or resident of Israel, or with any other person, pursuant to an agreement of, or a request from or on behalf of a boycotting country; (2) Refusing, or requiring any U.S. person to refuse to employ or otherwise discriminating against any person on the basis of race, religion, sex, or national origin of that person or of any owner, officer, director, or employee of such person; (3) Furnishing information with respect to the race, religion, or national origin of any U.S. person or of any owner, officer, director, or employee of such U.S. person; (4) Furnishing information about whether any person has, has had, or proposes to have any business relationship (including a relationship by way of sale, purchase, legal or commercial representation, shipping or other transport, insurance, investment, or supply) with or in the State of Israel, with any business concern organized under the laws of the State of Israel, with any Israeli national or resident, or with any person which is known or believed to be restricted from having any business relationship with or in Israel; (5) Furnishing information about whether any person is a member of, has made contributions to, or is otherwise associated with or involved in the activities of any charitable or fraternal organization which supports the State of Israel; and, (6) Paying, honoring, confirming, or otherwise implementing letter of credit which contains any condition or requirement against doing business with the State of Israel. (b) Under Section 8(a), the following types of activities are not forbidden compliance with the boycott , and are therefore exempted from Section 8(a)'s prohibitions listed in paragraphs (a)(1) through (6) above: (1) Complying or agreeing to comply with requirements: (i) Prohibiting the import of goods or services from Israel or goods produced or services provided by any business concern organized under the laws of Israel or by nationals or residents of Israel; or, (ii) Prohibiting the shipment of goods to Israel on a carrier of Israel, or by a route other than that prescribed by the boycotting country or the recipient of the shipment;
(2) Complying or agreeing to comply with import and shipping document requirements with respect to the country of origin, the name of the carrier and route of shipment, the name of the supplier of the shipment or the name of the provider of other services, except that no information knowingly furnished or conveyed in response to such requirements may be stated in negative, blacklisting, or similar exclusionary terms, other than with respect to carriers or route of shipments as may be permitted by such regulations in order to comply with precautionary requirements protecting against war risks and confiscation;
Buy Term Description: The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acquisition.gov/far/
Examination of Records a. With respect to matters related to this contract or a subcontract hereunder, the Department of State Office of the Inspector General, or an authorized representative, shall have upon request: 1. Complete, prompt, and free access to all Contractor and Subcontractor files (in any format), documents, records, data, premises, and employees, except as limited by law; and 2. The right to interview any current Contractor and Subcontractor personnel, individually and directly, with respect to such matters. b. This clause may not be construed to require the contractor or any subcontractor to create or maintain any record that the contractor or subcontractor does not maintain in the ordinary course of business or pursuant to a provision of law. c. The Contractor shall insert a clause containing all the terms of this clause, including this paragraph (c), in all subcontracts under this contract other than acquisitions described in Federal Acquisition Regulation 15.209(b)(1). (87 FR 1082, Jan 10, 2022)
By agreeing to this term, you agree to all terms in the attached documents