R21EB038444
Project Grant
Overview
Grant Description
Fully integrated electro-optic sensor for real-time MRI guided interventions - Project summary/abstract
Minimally invasive, image-guided interventions have been demonstrated to reduce mortality, morbidity, recovery times, and procedure-related risks.
Consequently, they are increasingly replacing invasive surgical procedures in the treatment of major diseases, ranging from cardiovascular disease to cancer.
Current practice widely uses X-ray fluoroscopy for image guidance.
However, this technique suffers from poor soft tissue contrast, hampering its use in complex procedures that require precise tissue localization, such as myocardial biopsy.
It also exposes the patient to ionizing radiation, raising health concerns, particularly for patients who require multiple procedures over time.
Unlike X-ray fluoroscopy, magnetic resonance imaging (MRI) has recently become the gold standard for image-guided interventions due to its ability to provide excellent soft tissue contrast while using non-ionizing radiation.
It also provides functional information, such as blood flow velocities, perfusion, and diffusion.
However, there has been very limited success to date in harnessing the power of MRI for procedural guidance.
This is due to the unavailability of interventional devices such as catheters and needles that are safe and visible under MRI.
Passive devices have shown shortcomings due to their imaging artifacts and poor contrast.
On the other hand, most active devices based on coil or dipole antennas to detect radiofrequency (RF) signals for device localization under MRI use long conductive transmission lines.
These devices, however, suffer from RF-induced heating due to RF energy deposition into these conductors during MRI, creating a safety hazard; this issue gets exacerbated at high magnetic fields (e.g., 3 Tesla (T)).
Although several methods have been proposed to mitigate RF heating, none has resulted in a clinical-grade device achieving a signal-to-noise ratio (SNR) sufficient for real-time device tracking.
To address these limitations, we need to break away from the conventional scheme of relaying signals on conductors.
Here, we propose a disruptive approach combining the latest advancements in nanofabrication and optics to develop an innovative clinical-grade electro-optic sensor for real-time position tracking of devices with virtually zero RF-induced heating under MRI.
The sensor core element is a miniature probe, in which a coil antenna coupled with an optical microresonator (OMR), detects and converts an RF signal into an optical signal.
The ultra-high quality factor OMR enhances the detected RF signal.
An optical fiber carries the resulting signal to a module outside the body for sensor integration with a clinical MRI scanner.
Unlike existing approaches, our novel design approach greatly enhances SNR and enables routing on an optical fiber instead of a long conductive transmission line, eliminating RF-induced heating and electromagnetic interference.
We will package our sensor onto a commercially available MRI-compatible catheter to validate its clinical utility in tissue-mimicking phantoms and ex vivo in swine via MR imaging experiments at 1.5T and 3T.
Successful demonstration of our electro-optic sensor as an active MRI marker can transform the field of MRI-guided interventions by opening the door to safer, novel, more complex, more effective, radiation-free, and minimally invasive interventions in various clinical fields.
Minimally invasive, image-guided interventions have been demonstrated to reduce mortality, morbidity, recovery times, and procedure-related risks.
Consequently, they are increasingly replacing invasive surgical procedures in the treatment of major diseases, ranging from cardiovascular disease to cancer.
Current practice widely uses X-ray fluoroscopy for image guidance.
However, this technique suffers from poor soft tissue contrast, hampering its use in complex procedures that require precise tissue localization, such as myocardial biopsy.
It also exposes the patient to ionizing radiation, raising health concerns, particularly for patients who require multiple procedures over time.
Unlike X-ray fluoroscopy, magnetic resonance imaging (MRI) has recently become the gold standard for image-guided interventions due to its ability to provide excellent soft tissue contrast while using non-ionizing radiation.
It also provides functional information, such as blood flow velocities, perfusion, and diffusion.
However, there has been very limited success to date in harnessing the power of MRI for procedural guidance.
This is due to the unavailability of interventional devices such as catheters and needles that are safe and visible under MRI.
Passive devices have shown shortcomings due to their imaging artifacts and poor contrast.
On the other hand, most active devices based on coil or dipole antennas to detect radiofrequency (RF) signals for device localization under MRI use long conductive transmission lines.
These devices, however, suffer from RF-induced heating due to RF energy deposition into these conductors during MRI, creating a safety hazard; this issue gets exacerbated at high magnetic fields (e.g., 3 Tesla (T)).
Although several methods have been proposed to mitigate RF heating, none has resulted in a clinical-grade device achieving a signal-to-noise ratio (SNR) sufficient for real-time device tracking.
To address these limitations, we need to break away from the conventional scheme of relaying signals on conductors.
Here, we propose a disruptive approach combining the latest advancements in nanofabrication and optics to develop an innovative clinical-grade electro-optic sensor for real-time position tracking of devices with virtually zero RF-induced heating under MRI.
The sensor core element is a miniature probe, in which a coil antenna coupled with an optical microresonator (OMR), detects and converts an RF signal into an optical signal.
The ultra-high quality factor OMR enhances the detected RF signal.
An optical fiber carries the resulting signal to a module outside the body for sensor integration with a clinical MRI scanner.
Unlike existing approaches, our novel design approach greatly enhances SNR and enables routing on an optical fiber instead of a long conductive transmission line, eliminating RF-induced heating and electromagnetic interference.
We will package our sensor onto a commercially available MRI-compatible catheter to validate its clinical utility in tissue-mimicking phantoms and ex vivo in swine via MR imaging experiments at 1.5T and 3T.
Successful demonstration of our electro-optic sensor as an active MRI marker can transform the field of MRI-guided interventions by opening the door to safer, novel, more complex, more effective, radiation-free, and minimally invasive interventions in various clinical fields.
Awardee
Funding Goals
TO SUPPORT HYPOTHESIS-, DESIGN-, TECHNOLOGY-, OR DEVICE-DRIVEN RESEARCH RELATED TO THE DISCOVERY, DESIGN, DEVELOPMENT, VALIDATION, AND APPLICATION OF TECHNOLOGIES FOR BIOMEDICAL IMAGING AND BIOENGINEERING. THE PROGRAM INCLUDES BIOMATERIALS (BIOMIMETICS, BIOPROCESSING, ORGANOGENESIS, REHABILITATION, TISSUE ENGINEERING, IMPLANT SCIENCE, MATERIAL SCIENCE, INTERFACE SCIENCE, PHYSICS AND STRESS ENGINEERING, TECHNOLOGY ASSESSMENT OF MATERIALS/DEVICES), BIOSENSORS/BIOTRANSDUCERS (TECHNOLOGY DEVELOPMENT, TECHNOLOGY ASSESSMENT, DEVELOPMENT OF ALGORITHMS, TELEMETRY), NANOTECHNOLOGY (NANOSCIENCE, BIOMIMETICS, DRUG DELIVERY SYSTEMS, DRUG BIOAVAILABILITY, MICROARRAY/COMBINATORIAL TECHNOLOGY, GENETIC ENGINEERING, COMPUTER SCIENCE, TECHNOLOGY ASSESSMENT), BIOINFORMATICS (COMPUTER SCIENCE, INFORMATION SCIENCE, MATHEMATICS, BIOMECHANICS, COMPUTATIONAL MODELING AND SIMULATION, REMOTE DIAGNOSIS AND THERAPY), IMAGING DEVICE DEVELOPMENT, BIOMEDICAL IMAGING TECHNOLOGY DEVELOPMENT, IMAGE EXPLOITATION, CONTRAST AGENTS, INFORMATICS AND COMPUTER SCIENCES RELATED TO IMAGING, MOLECULAR AND CELLULAR IMAGING, BIOELECTRICS/BIOMAGNETICS, ORGAN AND WHOLE BODY IMAGING, SCREENING FOR DISEASES AND DISORDERS, AND IMAGING TECHNOLOGY ASSESSMENT AND SURGERY (TECHNIQUE DEVELOPMENT AND TECHNOLOGY DEVELOPMENT).
Grant Program (CFDA)
Awarding / Funding Agency
Place of Performance
Boston,
Massachusetts
021153167
United States
Geographic Scope
Single Zip Code
Northeastern University was awarded
Project Grant R21EB038444
worth $219,818
from the National Institute of Biomedical Imaging and Bioengineering in April 2026 with work to be completed primarily in Boston Massachusetts United States.
The grant
has a duration of 2 years 9 months and
was awarded through assistance program 93.286 Discovery and Applied Research for Technological Innovations to Improve Human Health.
The Project Grant was awarded through grant opportunity Trailblazer Award for New and Early Stage Investigators (R21 Clinical Trial Optional).
Status
(Ongoing)
Last Modified 5/5/26
Period of Performance
4/27/26
Start Date
1/31/29
End Date
Funding Split
$219.8K
Federal Obligation
$0.0
Non-Federal Obligation
$219.8K
Total Obligated
Activity Timeline
Additional Detail
Award ID FAIN
R21EB038444
SAI Number
R21EB038444-2924996662
Award ID URI
SAI UNAVAILABLE
Awardee Classifications
Private Institution Of Higher Education
Awarding Office
75N800 NIH National Institute of Biomedical Imaging and Bioengineering
Funding Office
75N800 NIH National Institute of Biomedical Imaging and Bioengineering
Awardee UEI
HLTMVS2JZBS6
Awardee CAGE
9A140
Performance District
MA-07
Senators
Edward Markey
Elizabeth Warren
Elizabeth Warren
Modified: 5/5/26