2421903
Project Grant
Overview
Grant Description
SBIR Phase I: Conquering 3D FDM printing's Achilles heel, inter-layer adhesion, to print engineering grade products on consumer 3D printers.
The broader/commercial impact of this Small Business Innovation Research (SBIR) Phase 1 project lies in its potential to revolutionize the nation’s 3D printing industry by introducing TulloMer, a proprietary liquid crystal polymer (LCP) that offers unparalleled strength, lightweight properties, radio transparency, inertness, and non-flammability using sustainable non-toxic materials.
Eliminating lower performance, difficult-to-print polymers like PEEK, which require fluorobenzene processing and annealing, the project's innovative approach to improving as-printed tensile strength shall establish TulloMer as a superior alternative to existing FDM filaments.
TulloMer also has the potential to greatly expand the $1B high-performance 3D printing market by democratizing engineering-grade printing on consumer printers.
The company’s business model involves strategic partnerships with major industry players, ensuring strong market entry and scalability.
The initial market segment will target applications where lightweight, high-strength materials are critical, such as automotive, defense, and aerospace industries.
TulloMer’s potential to replace both metals and certain unsustainable high-performance polymers is key to Z-Polymers' commercial success, innovation, and economic growth.
The Small Business Innovation Research (SBIR) Phase 1 project addresses significant limitations in fused deposition modeling 3D printing by developing a novel liquid crystal polymer known as TulloMer, derived from 4-hydroxybenzoic acid.
Traditional fused deposition modeling materials suffer from inadequate inter-layer adhesion, leading to weak and inconsistent parts.
This project aims to enhance the mechanical properties and environmental compatibility of these materials by optimizing monomer ratios, integrating nucleation additives, controlling mesogenic state formation, and tuning molecular weight and viscosity.
The technical approach involves developing methods for surface activation and incorporating cross-linking additives to improve inter-layer bonding and rheological properties.
Distinctive attributes of this liquid crystal polymer include its melt-processability, lack of per-fluorinated compounds, and absence of bisphenol A in processing, which contributes to its superior environmental compatibility.
The anticipated results are a high-strength, eco-friendly filament that can be processed on standard 3D printers (~300°C).
This filament is expected to outperform existing materials in terms of both mechanical strength and sustainability.
Validation will include performance testing against industry standards and comparison with current filaments.
The project aligns with global trends, positioning TulloMer as a disruptive force in the 3D printing market, particularly for applications in electric vehicles, defense, automotive, and aerospace industries.
This award reflects NSF's statutory mission and has been deemed worthy of support through evaluation using the foundation's intellectual merit and broader impacts review criteria.
Subawards are not planned for this award.
The broader/commercial impact of this Small Business Innovation Research (SBIR) Phase 1 project lies in its potential to revolutionize the nation’s 3D printing industry by introducing TulloMer, a proprietary liquid crystal polymer (LCP) that offers unparalleled strength, lightweight properties, radio transparency, inertness, and non-flammability using sustainable non-toxic materials.
Eliminating lower performance, difficult-to-print polymers like PEEK, which require fluorobenzene processing and annealing, the project's innovative approach to improving as-printed tensile strength shall establish TulloMer as a superior alternative to existing FDM filaments.
TulloMer also has the potential to greatly expand the $1B high-performance 3D printing market by democratizing engineering-grade printing on consumer printers.
The company’s business model involves strategic partnerships with major industry players, ensuring strong market entry and scalability.
The initial market segment will target applications where lightweight, high-strength materials are critical, such as automotive, defense, and aerospace industries.
TulloMer’s potential to replace both metals and certain unsustainable high-performance polymers is key to Z-Polymers' commercial success, innovation, and economic growth.
The Small Business Innovation Research (SBIR) Phase 1 project addresses significant limitations in fused deposition modeling 3D printing by developing a novel liquid crystal polymer known as TulloMer, derived from 4-hydroxybenzoic acid.
Traditional fused deposition modeling materials suffer from inadequate inter-layer adhesion, leading to weak and inconsistent parts.
This project aims to enhance the mechanical properties and environmental compatibility of these materials by optimizing monomer ratios, integrating nucleation additives, controlling mesogenic state formation, and tuning molecular weight and viscosity.
The technical approach involves developing methods for surface activation and incorporating cross-linking additives to improve inter-layer bonding and rheological properties.
Distinctive attributes of this liquid crystal polymer include its melt-processability, lack of per-fluorinated compounds, and absence of bisphenol A in processing, which contributes to its superior environmental compatibility.
The anticipated results are a high-strength, eco-friendly filament that can be processed on standard 3D printers (~300°C).
This filament is expected to outperform existing materials in terms of both mechanical strength and sustainability.
Validation will include performance testing against industry standards and comparison with current filaments.
The project aligns with global trends, positioning TulloMer as a disruptive force in the 3D printing market, particularly for applications in electric vehicles, defense, automotive, and aerospace industries.
This award reflects NSF's statutory mission and has been deemed worthy of support through evaluation using the foundation's intellectual merit and broader impacts review criteria.
Subawards are not planned for this award.
Awardee
Funding Goals
THE GOAL OF THIS FUNDING OPPORTUNITY, "NSF SMALL BUSINESS INNOVATION RESEARCH (SBIR)/ SMALL BUSINESS TECHNOLOGY TRANSFER (STTR) PROGRAMS PHASE I", IS IDENTIFIED IN THE LINK: HTTPS://WWW.NSF.GOV/PUBLICATIONS/PUB_SUMM.JSP?ODS_KEY=NSF23515
Grant Program (CFDA)
Awarding / Funding Agency
Place of Performance
North Andover,
Massachusetts
01845-2047
United States
Geographic Scope
Single Zip Code
Z-Polymers was awarded
Project Grant 2421903
worth $275,000
from National Science Foundation in September 2024 with work to be completed primarily in North Andover Massachusetts United States.
The grant
has a duration of 8 months and
was awarded through assistance program 47.084 NSF Technology, Innovation, and Partnerships.
The Project Grant was awarded through grant opportunity NSF Small Business Innovation Research / Small Business Technology Transfer Phase I Programs.
SBIR Details
Research Type
SBIR Phase I
Title
SBIR Phase I: Conquering 3D FDM Printing's Achilles Heel, Inter-Layer Adhesion, to Print Engineering Grade Products on Consumer 3D Printers.
Abstract
The broader/commercial impact of this Small Business Innovation Research (SBIR) Phase 1 project lies in its potential to revolutionize the nation’s 3D printing industry by introducing Tullomer, a proprietary liquid crystal polymer (LCP) that offers unparalleled strength, lightweight properties, radio transparency, inertness, and non-flammability using sustainable non-toxic materials. Eliminating lower performance, difficult-to-print polymers like PEEK, which require fluorobenzene processing and annealing, the project's innovative approach to improving as-printed tensile strength shall establish Tullomer as a superior alternative to existing FDM filaments. Tullomer also has the potential to greatly expand the $1B high-performance 3D printing market by democratizing engineering-grade printing on consumer printers. The company’s business model involves strategic partnerships with major industry players, ensuring strong market entry and scalability. The initial market segment will target applications where lightweight, high-strength materials are critical, such as automotive, defense, and aerospace industries. Tullomer’s potential to replace both metals and certain unsustainable high-performance polymers is key to Z-Polymers' commercial success, innovation, and economic growth.
The Small Business Innovation Research (SBIR) Phase 1 project addresses significant limitations in fused deposition modeling 3D printing by developing a novel liquid crystal polymer known as Tullomer, derived from 4-hydroxybenzoic acid. Traditional fused deposition modeling materials suffer from inadequate inter-layer adhesion, leading to weak and inconsistent parts. This project aims to enhance the mechanical properties and environmental compatibility of these materials by optimizing monomer ratios, integrating nucleation additives, controlling mesogenic state formation, and tuning molecular weight and viscosity. The technical approach involves developing methods for surface activation and incorporating cross-linking additives to improve inter-layer bonding and rheological properties. Distinctive attributes of this liquid crystal polymer include its melt-processability, lack of per-fluorinated compounds, and absence of Bisphenol A in processing, which contributes to its superior environmental compatibility. The anticipated results are a high-strength, eco-friendly filament that can be processed on standard 3D printers (~300°C). This filament is expected to outperform existing materials in terms of both mechanical strength and sustainability. Validation will include performance testing against industry standards and comparison with current filaments. The project aligns with global trends, positioning Tullomer as a disruptive force in the 3D printing market, particularly for applications in electric vehicles, defense, automotive, and aerospace industries.
This award reflects NSF's statutory mission and has been deemed worthy of support through evaluation using the Foundation's intellectual merit and broader impacts review criteria.
Topic Code
AM
Solicitation Number
NSF 23-515
Status
(Complete)
Last Modified 9/17/24
Period of Performance
9/1/24
Start Date
5/31/25
End Date
Funding Split
$275.0K
Federal Obligation
$0.0
Non-Federal Obligation
$275.0K
Total Obligated
Activity Timeline
Additional Detail
Award ID FAIN
2421903
SAI Number
None
Award ID URI
SAI EXEMPT
Awardee Classifications
Small Business
Awarding Office
491503 TRANSLATIONAL IMPACTS
Funding Office
491503 TRANSLATIONAL IMPACTS
Awardee UEI
HETYT8EUPN41
Awardee CAGE
9S4H4
Performance District
MA-06
Senators
Edward Markey
Elizabeth Warren
Elizabeth Warren
Modified: 9/17/24