2335117
Cooperative Agreement
Overview
Grant Description
SBIR Phase II: A new class of highly conductive solid polymer separator membranes compatible with high voltage cathodes.
The broader/commercial impact of this Small Business Innovation Research (SBIR) Phase II project is a high-density battery that will improve products that require energy storage.
Potential customers for the innovation include battery manufacturers for a variety of applications including but not limited to space and military, small wearable devices, radio frequency identification (RFID), drones, consumer electronics, as well as automotive original equipment manufacturers (OEMs) in the mass mobility market.
The demand for advanced energy storage devices creates a market opportunity that is projected to reach $130 billion by 2027.
This market is mostly driven by the need for electric vehicle batteries that are cheaper, lighter, and safer, while allowing for longer drive ranges and reduced charge times.
In the long-term, advanced batteries like those enabled by the new technology may drive the electrification of the transportation sector, reduce fossil fuel dependency, and support the transition towards greener energy solutions.
The intellectual merit of this project is the development of a highly conductive, solid battery separator membrane made of a new solid polymer electrolyte which is lighter, more flexible, compatible with high voltage cathodes, and scalable for manufacturing purposes.
Battery cells made with this separator membrane have the potential for greatly improved safety, higher cyclability, and operation under a wider range of temperatures.
This project seeks to demonstrate this new separator in a multilayer pouch cell, aiming to reach energy densities above 600 watts-hour (Wh)/kilograms (Kg), i.e., more than 2x those of current lithium (Li)-ion technology.
The new separator has been validated through half-cell testing with high-voltage cathodes, demonstrating significantly better performance than legacy polymers.
The goals of this project include (1) scaling up the manufacturing of the separator to multilayer pouch cell size, and (2) demonstrating its functionality in a multilayer pouch cell prototype integrating the rest of the battery elements.
Cell functional parameters, cyclability, stability, temperature range, and other cell level operating conditions will be demonstrated through testing.
This effort will generate a solid polymer electrolyte ready to be fully scaled and manufactured by an industrial customer through licensing.
This award reflects NSF's statutory mission and has been deemed worthy of support through evaluation using the foundation's intellectual merit and broader impacts review criteria.
Subawards are not planned for this award.
The broader/commercial impact of this Small Business Innovation Research (SBIR) Phase II project is a high-density battery that will improve products that require energy storage.
Potential customers for the innovation include battery manufacturers for a variety of applications including but not limited to space and military, small wearable devices, radio frequency identification (RFID), drones, consumer electronics, as well as automotive original equipment manufacturers (OEMs) in the mass mobility market.
The demand for advanced energy storage devices creates a market opportunity that is projected to reach $130 billion by 2027.
This market is mostly driven by the need for electric vehicle batteries that are cheaper, lighter, and safer, while allowing for longer drive ranges and reduced charge times.
In the long-term, advanced batteries like those enabled by the new technology may drive the electrification of the transportation sector, reduce fossil fuel dependency, and support the transition towards greener energy solutions.
The intellectual merit of this project is the development of a highly conductive, solid battery separator membrane made of a new solid polymer electrolyte which is lighter, more flexible, compatible with high voltage cathodes, and scalable for manufacturing purposes.
Battery cells made with this separator membrane have the potential for greatly improved safety, higher cyclability, and operation under a wider range of temperatures.
This project seeks to demonstrate this new separator in a multilayer pouch cell, aiming to reach energy densities above 600 watts-hour (Wh)/kilograms (Kg), i.e., more than 2x those of current lithium (Li)-ion technology.
The new separator has been validated through half-cell testing with high-voltage cathodes, demonstrating significantly better performance than legacy polymers.
The goals of this project include (1) scaling up the manufacturing of the separator to multilayer pouch cell size, and (2) demonstrating its functionality in a multilayer pouch cell prototype integrating the rest of the battery elements.
Cell functional parameters, cyclability, stability, temperature range, and other cell level operating conditions will be demonstrated through testing.
This effort will generate a solid polymer electrolyte ready to be fully scaled and manufactured by an industrial customer through licensing.
This award reflects NSF's statutory mission and has been deemed worthy of support through evaluation using the foundation's intellectual merit and broader impacts review criteria.
Subawards are not planned for this award.
Awardee
Funding Goals
THE GOAL OF THIS FUNDING OPPORTUNITY, "NSF SMALL BUSINESS INNOVATION RESEARCH PHASE II (SBIR)/ SMALL BUSINESS TECHNOLOGY TRANSFER (STTR) PROGRAMS PHASE II", IS IDENTIFIED IN THE LINK: HTTPS://WWW.NSF.GOV/PUBLICATIONS/PUB_SUMM.JSP?ODS_KEY=NSF23516
Grant Program (CFDA)
Awarding / Funding Agency
Place of Performance
Tallahassee,
Florida
32310-3760
United States
Geographic Scope
Single Zip Code
Piersica was awarded
Cooperative Agreement 2335117
worth $1,000,000
from National Science Foundation in September 2024 with work to be completed primarily in Tallahassee Florida United States.
The grant
has a duration of 2 years and
was awarded through assistance program 47.084 NSF Technology, Innovation, and Partnerships.
The Cooperative Agreement was awarded through grant opportunity NSF Small Business Innovation Research / Small Business Technology Transfer Phase II Programs (SBIR/STTR Phase II).
SBIR Details
Research Type
SBIR Phase II
Title
SBIR Phase II: A new class of highly conductive solid polymer separator membranes compatible with high voltage cathodes
Abstract
The broader/commercial impact of this Small Business Innovation Research (SBIR) Phase II project is a high-density battery that will improve products that require energy storage. Potential customers for the innovation include battery manufacturers for a variety of applications including but not limited to space and military, small wearable devices, radio frequency identification (RFID), drones, consumer electronics, as well as automotive original equipment manufacturers (OEMs) in the mass mobility market. The demand for advanced energy storage devices creates a market opportunity that is projected to reach $130 billion by 2027. This market is mostly driven by the need for electric vehicle batteries that are cheaper, lighter, and safer, while allowing for longer drive ranges and reduced charge times. In the long-term, advanced batteries like those enabled by the new technology may drive the electrification of the transportation sector, reduce fossil fuel dependency, and support the transition towards greener energy solutions.
The intellectual merit of this project is the development of a highly conductive, solid battery separator membrane made of a new solid polymer electrolyte which is lighter, more flexible, compatible with high voltage cathodes, and scalable for manufacturing purposes. Battery cells made with this separator membrane have the potential for greatly improved safety, higher cyclability, and operation under a wider range of temperatures. This project seeks to demonstrate of this new separator in a multilayer pouch cell, aiming to reach energy densities above 600 Watts-hour (Wh)/kilograms (kg), i.e., more than 2x those of current lithium (Li)-ion technology. The new separator has been validated through half-cell testing with high-voltage cathodes, demonstrating significantly better performance than legacy polymers. The goals of this project include (1) scaling up the manufacturing of the separator to multilayer pouch cell size, and (2) demonstrating its functionality in a multilayer pouch cell prototype integrating the rest of the battery elements. Cell functional parameters, cyclability, stability, temperature range, and other cell level operating conditions will be demonstrated through testing. This effort will generate a solid polymer electrolyte ready to be fully scaled and manufactured by an industrial customer through licensing.
This award reflects NSF's statutory mission and has been deemed worthy of support through evaluation using the Foundation's intellectual merit and broader impacts review criteria.
Topic Code
EN
Solicitation Number
NSF 23-516
Status
(Ongoing)
Last Modified 9/25/24
Period of Performance
9/15/24
Start Date
8/31/26
End Date
Funding Split
$1.0M
Federal Obligation
$0.0
Non-Federal Obligation
$1.0M
Total Obligated
Activity Timeline
Additional Detail
Award ID FAIN
2335117
SAI Number
None
Award ID URI
SAI EXEMPT
Awardee Classifications
Small Business
Awarding Office
491503 TRANSLATIONAL IMPACTS
Funding Office
491503 TRANSLATIONAL IMPACTS
Awardee UEI
LTV4UT7Z4UV3
Awardee CAGE
986K7
Performance District
FL-02
Senators
Marco Rubio
Rick Scott
Rick Scott
Modified: 9/25/24