Pilatus4 900k Detector

Background
The contract is issued for the procurement of a new detector for the CMS beamline at NSLS II. The goal is to replace and upgrade an existing detector to maintain operational capabilities in the vacuum chamber. This project is critical for advancing research and experiments conducted at the facility.

Work Details
The procurement includes a custom-designed PILATUS4 S 900K-CMS detector, a vacuum feedthrough, and commissioning services. The new detector will feature a smaller pixel size of 150 microns, maintain the same frame rate of 25Hz, and have thin edges measuring less than 0.6mm. It will serve as the Wide-Angles X-ray scattering (WAXS) detector, operating simultaneously with the Pilatus2M SAXS detector. The design has been reviewed and approved by the BNL Technical Representative.

Deliverables include:
- Detector manufacturing and delivery approximately 7.5 months after order.
- Successful commissioning at the CMS beamline within 1–2 months after delivery.
- End-item documentation including operation manual, commissioning/test report, calibration records, and applicable certificates.

Period of Performance
Approximately 7.5 months after order for manufacturing and delivery; commissioning expected to take an additional 1–2 months post-delivery.

Place of Performance
CMS beamline at NSLS II.

Bidder Requirements
Bidders must provide a custom-designed PILATUS4 S 900K-CMS detector compatible with existing infrastructure. No specific manufacturer or reseller authorizations are mentioned, but compliance with BNL-approved design standards is required.