Optical Table and Leg Kit

The purpose of this sources sought notice is to conduct market research and identify potential sources of commercial products/services that satisfy the Government's anticipated needs.

BACKGROUND

The National Institute of Standards and Technology (NIST), under the CHIPS and Science Act, is advancing materials science research to enhance the U.S. semiconductor manufacturing capabilities. The Materials Science and Engineering Division at NIST requires a vibration-damping optical table to support a confocal Raman microscope spectrometer. This setup is critical for conducting spatially resolved Raman mapping to study superfilling processes in semiconductor materials, a key factor in the development of next-generation microelectronic interconnects.

Precision mapping of chemical properties across patterned semiconductor surfaces is essential for improving electrochemical fabrication techniques used in chip manufacturing. Specifically, understanding feature filling in trenches and vias necessitates advanced, localized mapping techniques that provide insights into surface chemistry during the fabrication of 3D interconnects. Superconformal filling achieved through surfactant-mediated film growth is integral to the successful formation of these interconnects. Further optimization of this process hinges on precise, spatially resolved chemical data at metal interfaces, directly impacting the performance and reliability of on-chip metallizations, through-silicon vias, and advanced packaging applications.

This optical table will provide the stable environment necessary to eliminate ambient vibrations, ensuring the accuracy and resolution required for these intricate Raman measurements and thereby supporting NIST's broader mission to advance semiconductor technologies essential to national and economic security.

Minimum specifications:

Dimensions:

• Length: 96 inches (8 feet) (or equivalent...e.g. metric)
• Width: 48 inches (4 feet) (or equivalent...e.g. metric)
• Table Height: 8 inches (table thickness) (or equivalent...e.g. metric)

Vibration Isolation:

• Vertical natural frequency: 2.0 Hz
• Horizontal natural frequency: 1.5 Hz
• Vibration isolation efficiency at 10 Hz: 95%

Damping:

• Damping type: Broadband damping or tuned mass damping
• Nominal Damping Ratio: 0.4%

Surface Flatness:

• Across the entire table: 0.1 mm
• Maximum Relative Tabletop Motion < 0.14 nm

Surface Material:

• Magnetic stainless steel with high corrosion resistance (e.g., 400 series stainless steel)

Hole Grid and Taps:

• Hole grid pattern: 1-inch spacing
• Hole diameter and threading: 1/4"-20 tapped holes (or M6 for metric)
• Tolerance for hole position: 0.25 mm from center
• Sealed mounting holes

Load Capacity:

• Static load capacity: 800 kg (1,764 lbs)

Deflection Under Load:

• Maximum deflection at center under load (100 kg): 0.25 mm

Surface Finish:

• Surface roughness: 0.8 m Ra

Environmental Resistance:

• Resistant to typical laboratory chemicals and minor abrasions

Thermal Stability:

• Coefficient of thermal expansion: 12 m/m/ C

Isolation Leg Assembly:

• Pneumatic isolation legs with adjustable height
• Load capacity per leg: 200 kg (441 lbs)
• Leg height adjustment range: 2 inches.

Rigging/Installation

• Location is 360 ft from garage to lab
• No elevator required
• Dock is only a few inches from ground level, fork lift will be required for removing the table from the truck bed

Optional items:

Laser blackout curtains system

• Material and Laser protection
  • Material: Opaque, flame-retardant, high-density fabric (typically polyester or similar, rated for laser use)
  • Laser Protection: Certified to block laser wavelengths in use, typically compliant with ANSI Z136 standards for laser safety.
  • Optical Density (OD): OD 5 at 532 nm, 633 nm, and 785 nm
  • Flame Resistance: Meets or exceeds NFPA 701 standards.

Overhead shelf system with electrical supply

• Width: Aligned with optical table dimensions (e.g., 4 feet for a standard 4' x 8' table)

Height from Table: Adjustable clearance with approximately 36 inches above the optical table surface.

HOW TO RESPOND TO THIS NOTICE

In responding to this notice, please DO NOT PROVIDE PROPRIETARY INFORMATION. Please include only the following information, readable in either Microsoft Word 365, Microsoft Excel 365, or .pdf format, in the response: Submit the response by email to the Primary Point of Contact and, if specified, to the Secondary Point of Contact listed in this notice as soon as possible, and preferably before the closing date and time of this notice. Please note that to be considered for award under any official solicitation, the entity must be registered and active in SAM at the time of solicitation response.

• Provide the complete name of your company, address, name of contact for follow-up questions, their email, their phone number and, if your company has an active registration in https://sam.gov, your company's Unique Entity ID (UEI).
• Identify the equipment that your company sells that can meet the objectives addressed in the BACKGROUND section of this notice. For each product recommended to meet the Government's requirement, provide the following:
  • Manufacturer name
  • Model number
  • Technical specifications
  • If your company is not the manufacturer, provide information on your company's status as an authorized reseller of the product(s)
• Describe performance capabilities of the product(s) your company recommends to meet the Government's requirements. Additionally, if there are other features or functions that you believe would assist NIST in meeting its objectives described above, please discuss in your response.
  • Discuss whether the equipment that your company sells and which you describe in your response to this notice may be customized to specifications and indicate any limits to customization.
• Identify any aspects of the NIST market research notice, including instructions, and draft minimum specifications in the BACKGROUND section you cannot meet and state why. Please offer suggestions for how the market research notice and draft minimum specifications could be made more competitive.
• State whether the proposed equipment is manufactured in the United States and, if not, state the name of the country where the equipment is manufactured.
• Identify any plans/possibilities for changes in manufacturing location of the aforementioned equipment and provide relevant details, including timeline.
• For the NAICS code listed in this notice:
• Indicate whether your company is (a) a small business or (b) other than small business. See the Table of Small Business Size Standards and the associated .pdf download file for small business size standards and additional information.
• If you believe the NAICS code listed in this notice is not the best NAICS code for the type of product addressed in this notice, identify an alternative NAICS code that you believe would be more appropriate for the planned procurement.
• Describe services that are available with the purchase of the aforementioned equipment from your company such as installation, training, and equipment maintenance.
• Describe standard terms and conditions of sale offered by your company for the recommended equipment such as: delivery time after your company accepts the order; FOB shipping terms; manufacturer warranty (including details regarding nature and duration); if available, description(s) of available extended warranty; equipment setup and test; operator and service instruction manual(s); cleanup after installation; and if applicable, other offered services. Provide a copy of manufacturer standard terms and conditions that typically relate to the sale of the specified equipment, if available.
• State whether your company offers facility renovation services related to installation of the recommended equipment at its delivery destination, if required per the NIST-identified minimum specifications, and provide description of said services. Indicate if your company performs the facility renovation services or typically subcontracts the work to another company. Indicate if your company would be interested in inspecting the intended installation site during the market research phase.
• State published price, discount, or rebate arrangements for recommended equipment and/or provide link to access company's published prices for equipment and services.
• If the recommended equipment and related services are available for purchase on any existing Federal Supply Schedule contract(s) or other contracts against which NIST may be able to place orders, identify the contract number(s) and other relevant information.
• Identify any customers in the public or private sectors to which you provided the recommended or similar equipment. Include customer(s) information: company name, phone number, point of contact, email address.
• Provide any other information that you believe would be valuable for NIST to know as part of its market research for this requirement.
• State if you require NIST to provide additional information to improve your understanding of the government's requirement and/or would like to meet with NIST representatives to discuss the requirement and the capabilities of the identified equipment.

QUESTIONS REGARDING THIS NOTICE

Questions regarding this notice may be submitted via email to the Primary Point of Contact and the Secondary Point of Contact listed in this notice. Questions should be submitted so that they are received 5 days prior to the response date. If the Contracting Officer determines that providing a written amendment to this notice to document question(s) received would benefit other potential respondents, the questions would be anonymized, and a written response to such question(s) would be provided via an amendment to this notice.

IMPORTANT NOTES

This notice is for market research purposes and should not be construed as a commitment by NIST to issue a solicitation or ultimately award a contract. There is no solicitation available at this time.

This notice does not obligate the Government to award a contract or otherwise pay for the information provided in response.

NIST reserves the right to use information provided by respondents for any purpose deemed necessary and legally appropriate.

Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization's capability.

Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted.

After a review of the responses received, a synopsis and solicitation may be published on GSA's eBuy or SAM.gov. However, responses to this notice will not be considered an adequate response to any such solicitation(s).

The responses shall not exceed (10) pages including all attachments, charts, etc.

Thank you for taking the time to submit a response to this request.