Operations and Maintenance Services for Brownsville, TX   3

The General Services Administration requires Operations and Maintenance Services in Brownsville, Texas. This procurement will be procured as a small business set-aside using FAR Part 15 procedures. The anticipated start date will be on or about November 1, 2019. The North American Industry Classification System (NAICS) to be used is 561210. The size standard for this NAICS is $38.5M. Specifically, the Contractor shall provide all management, supervision, labor, materials, supplies, repair parts, tools and equipment and shall plan, schedule, coordinate and assure effective performance of all services described herein. The Contractor shall provide all Operation and Maintenance services in accordance with the requirements of the specifications to include the following:
a. Electrical systems and equipment.
b. Mechanical, plumbing, Building Automation System (BAS) where applicable (where BAS/ ECMS systems are connected to the GSA network, the Contractor's
employees will need to obtain a GSA ENT account to access systems) and heating,
ventilation, exhaust systems and air conditioning (HVAC) systems and equipment.
c. Fire protection and life safety systems and equipment.
d. All control systems that are within the scope of this Contract. All Building
Automation Systems (BAS), Niagara Tridium Jace controls/system, Public Address Systems, and Computerized Lighting Systems that are within the scope of this
Contract.
e. Architectural and structural systems, fixtures, and equipment within the site (to the
property line) and outbound canopies. Limited to $200/3 hrs service call threshold.
f. Service request desk operations as identified in Section C.8.4 to include record
keeping using a computerized maintenance management system (CMMS) or by
other means as well as other administrative functions.
g. Maintenance of landscape irrigation systems.
h. Locks, keys, keycard systems, vehicle barrier systems and static and dynamic
bollard systems.
i. Lighting, dock levelers and bumpers and roll-up and sliding garage doors.
j. Storm drainage systems - reduce storm water pollution by minimizing discharges
and runoff to the storm sewer system and environment.
k. The Contractor shall complete roofing system investigations and repairs.
l. The Contractor shall maintain and repair U.S. flag pole, lighting and pulley system.
m. The Contractor shall maintain kitchen/concessions area drains.
n. The Contractor shall maintain conveying equipment, parking control equipment.
o. The Contractor is not responsible for the costs of software, firmware updates, and
licensing for the BAS and Tridium Niagara systems. However, the Contractor is
responsible for the labor to update/install software/firmware, when necessary, to
latest revision and update software licenses for BAS controls only. The Contractor
is responsible for letting Region 7 FMSP office know when updates are required.
The Contractor is responsible for keeping the systems operating properly.
p. Sanitary sewage equipment and systems, including kennel waste interceptors.
q. Domestic water filtration/pumping and fire supply tank systems