Combined Synopsis/Solicitation
AFLCMC/PZI Installation Contracting Support
Wright Patterson AFB, OH 45323
Date: 18 August 2026
Title: NASIC Building 828 Dining Furniture
Request for Quote (RFQ) / Solicitation Number: FA860126Q0133
Quotes Due: 01 September 2026 at 12:00 PM EDT
Contact Point(s): Arlyn Argueta, Contract Specialist; arlyn.argueta.1@us.af.mil
Contact Point(s): Linh Jameson, Contracting Officer; linh.jameson@us.af.mil
Description: This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with RFO Part 12. This announcement constitutes the only solicitation. Offers are being requested and a separate written solicitation will not be issued.
Solicitation number FA860126Q0133 is issued as a request for quotation (RFQ) for seating and tables for the recapitalization of the dining room furniture in Building 828.
This acquisition is 100% set-aside for small business concerns under NAICS code 337214 with a small business size of 1,100 employees. This solicitation incorporates provisions and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov.
The Government reserves the right to conduct interchanges with some, none, or all offerors, or make no award at all depending upon: An award, if any, will be made LPTA ie, to the lowest price Offeror who submits a proposal that:
1. Conforms to the requirements of the combined synopsis/solicitation.
2. Receives a rating of Acceptable on the Technical Capability evaluation factor.
3. Contains the lowest evaluated price (TEP), provided that the TEP is not unbalanced and is fair and reasonable.
The Government also reserves the right to cancel this solicitation, either before or after the closing date.
1. Requirement:
This requirement is for (11) 30 Round Dining Tables, (2) 30 Square Dining Tables, (11) 42 Round Dining Tables, (9) 36 x 60 Rectangular Dining Tables, (9) 36 x 96 Rectangular Dining Tables, (2) 36 x 72 Rectangular Dining Table, (4) 48 x 96 x 36 H Parson Tables, (172) Stacking Chairs, (24) Stacking Counter Stools, (1) Sectional Sofa, (1) Design, and (1) Delivery, Removal, and Installation in accordance with the Statement of Work (SOW).
CLIN SUPPLIES QUANTITY UNIT
0001 30 Round Dining Table 11 EACH
0002 30 Square Dining Table 2 EACH
0003 42 Round Dining Table 11 EACH
0004 36 x 60 Rectangular Dining Table 9 EACH
0005 36 x 96 Rectangular Dining Table 9 EACH
0006 36 x 72 Rectangular Dining Table 2 EACH
0007 48 x 96 x 36 H Parson Table 4 EACH
0008 Stacking Chair 172 EACH
0009 Stacking Counter Stool 24 EACH
0010 Sectional Sofa 1 EACH
0011 Design 1 EACH
0012 Delivery, Removal, and Installation 1 EACH
2. Period of Performance:
The delivery is required within 120 days after receipt of order (ARO) to Wright Patterson AFB, Ohio.
3. Provisions and Clauses:
See solicitation attachment for applicable provisions and clauses that apply to this acquisition.
NOTE 1: In accordance with R-DFARS 252.204-7998, Alternate A, Annual Representations and Certifications (Deviation 2026-O0043) (FEB 2026), the offeror's quote submission legally binds and certifies that its SAM registration is current, complete, accurate, and has been updated within the preceding 12 months as of the offer's date.
NOTE 2: In accordance with R-DFARS 252.204-7021 and R-DFARS 252.204-7025, a CMMC Level 1 assessment is the mandatory minimum requirement for all offerors bidding with the Department of War. Under CMMC Level 1, all offerors must demonstrate full compliance by self-certifying with the 15 basic safeguarding requirements for Federal Contract Information (FCI) outlined in RFO 52.240-93(b)(1). Once your organization has confirmed its compliance with these 15 requirements, you must enter this self-certification into the Supplier Performance Risk System (SPRS) module within PIEE (https://piee.eb.mil). Contract award cannot be made to any offeror that is not fully compliant and whose assessment results are not properly recorded in the system of record. You must verify the CMMC Level required for this award by checking the provisions and clauses within the solicitation.
4. Quotes Due Date:
Quotes must be submitted electronically to the Contract Specialist via e-mail at arlyn.argueta.1@us.af.mil and Contracting Officer at linh.jameson@us.af.mil. Quotes must conform to the requirements of this solicitation and be received no later than 01 September 2026 at 12:00 PM EDT. Questions are due by 26 August 2026 at 12:00 PM EDT. It is the responsibility of the offeror to ensure that the quote and its attachments are received. Any correspondence sent via e-mail must contain the subject line FA860126Q0133, NASIC Bldg 828 Dining Furniture The entire quotation must be contained in a single e-mail that does not exceed 5 megabytes including attachments, if any. E-mails with compressed files are not permitted. Note that e-mail filters at Wright-Patterson Air Force Base are designed to filter e-mails without subject lines or with suspicious subject lines or contents (i.e., .exe or .zip files). Therefore, if the specified subject line is not included, the e-mail may not get through the e-mail filters. Also be advised that .zip or .exe files are not allowable attachments and may be deleted by the email filters at Wright-Patterson. If sending attachments with email, ensure only .pdf, .doc, .docx, .xls or .xlsx documents are sent. The email filter may delete any other form of attachments. If a DoDSafe drop off is needed, please notify the contract specialist or contracting officer at least 48 hours before quotes are due. Any quotes received after designated closing date and time need not be considered. Quotes must include aggregate total of base plus all option year CLINS, if requested (IAW RFO 52.217-5 Evaluation of Options). All quotes shall be in whole dollars and conform to the Contract Line-Item Number (CLIN) structure of attached solicitation.
5. Notice to Vendor(s):
All vendors must fully complete and return the 'Required Information Sheet' (attached to the solicitation) and return with their quotation. Additionally, quotations that contain pricing only with no description/detail of the supply/service that will be provided will not be accepted or considered for award.
6. Tariffs:
In accordance with R-DFARS 252.225-7013, the contractor is prohibited from including any amount for customs duties on eligible items within the quote price. The claim for duty-free entry is restricted to supplies destined for government use, either as end items or as components thereof. The Government will provide assistance in the process of obtaining duty-free entry.
7. Period of Acceptance of Quotes:
Offeror agrees to hold prices in its quote firm for 60 calendar days from the date specified for receipt of offers.
8. SAM Registration:
Firms submitting a quote for the solicitation described herein, MUST be registered in the System for Award Management (SAM) database, or risk the quote as being non-responsive, regardless of the package being considered complete, timely or any other salient consideration. Information to register on SAM can be found at the web site, SAM.gov.
List of Attachments:
- Statement of Work (SOW)
- Furniture Plans
- Comprehensive Interior Design (CID) Package
- CLIN Structure
- Solicitation
REQUIRED INFORMATION SHEET:
(All vendors must complete and return this sheet with quote submission.)
Shipping/transportation will be FOB: Destination
Manufacturers End Product Country of Origin (Supplies Only):______________________
Payment Terms: ________________________ Delivery Date: ________________________
Company Name (as registered in SAM): ___________________________________________
UEI: _____________________________ CAGE: ____________________________________
CMMC Unique Identifier (UID): ________________________________________________
POC: _________________________________ Telephone: _____________________________
E-Mail: ________________________________
Warranty Information: _________________________________________________________
