Floor Sweeper Rider and Floor Scrubber Rider   2

Item 1: Requesting one Tennant M-800 Power Sweeper Rider. The sweeper needs an HVAC controlled operator cab. The sweeper needs to be capable of emptying into disposal receptacles up to six feet in height. The hopper bottom should be stainless steel. The cleaning path for the sweeper needs to be 66 inches. The sweeper needs a 4-state filtrations system. The sweeper needs to be 120 inches long, 70 inches wide, and have a minimum aisle turn of 135 inches and weigh 6,500 pounds. The sweeper needs a Kubota Tier 4 engine and needs to operate on diesel fuel. The collection hopper needs to have a 30 cubic foot capacity and be able to hold approximately 2,000 pounds of debris.

Item 2: Requesting one Tennant T7 24 VDC, 650/800MM, Scrubber Rider. The scrubber needs to have an estimated 29,000 square foot per hour cleaning system. The scrubber needs to have a fully accessible recovery tank. The solution tank capacity needs to be 29 gallons. The recovery tank needs to be 29 gallons. The scrubber needs to weigh less than 1,000 pounds. The scrubber needs a 24-volt battery system. The scrubber needs a 24-volt battery system. The scrubber needs to be 60 inches long, and 50 inches high. The scrubber needs a sound rating of less than 70dBA at the operator's ear. The scrubber needs to have at lease one forward speed for transportation, one forward working speed, and one reverse speed. The scrubber needs to be capable of performing ec-H2O NanoClean/FaST.