LATHE
The only commercially available Turning Center with Live Tooling found to have all the Primary
and Secondary Requirements described below combined into one machine is the Nakamura Tome
WT300MMY-F014.
Primary Requirements for the CNC Turning Center with Live Tooling:
Tools driven by direct drive motors built into the turrets
25 HP A2-8 Spindle on both Right and Left
4 (102mm) Bar capacity on both spindles
Fully closed loop control for X, Y & Z axes on both turrets having direct scale (magnetic)
feedback.
Fit within the maximum available area of 18 ft - 0 inches x 18 ft - 0 inches
Positioning accuracy of less than .0002 inch
Airbag Collision Protection (Nakamura Only)
Secondary Requirements for the CNC Turning Center With Live Tooling:
Basic Machine
o 2-turret specification (BMT 65)
Control
o Human Machine Interface (HMI) Operating Terminal with 19.0" touch control display screen and
Power failure Package.
o Fanuc F32iB CNC controller software
o Dual USB Ports
o Maintenance + Alarm Trouble Shooting
o Remote service capability
o Machine data connector
o Production package - high speed canned cycles
o Ethernet
Screen Text
o Screen display English
o Language on operating system screen: English
o Language on NC Screen: English
o Language on PC Screen: English
Spindle
o Left Spindle (Main Spindle)
Through-spindle hole dia. 102 mm
Bar stock machining capacity dia. 4
Maximum spindle speed 2500 rev/ min
Output 30 min continuous 15/18 kW
Continuous Torque Rating (133 lb/ft)
12 Chuck for left spindle (main spindle)
Left spindle hollow cylinder set for 12-inch hollow chuck for bar diameter 4.0 in.
Full C-axis (CF-Control)
C-Axis Clamp Braking Torque (188 lb/ft)
Polar Coordinate Interpolation
Cylindrical Interpolation
o Right Spindle (Sub Spindle)
Through-spindle hole dia. 102 mm
Bar stock machining capacity dia. 4
Maximum spindle speed 2500 rev/ min
Output 30 min continuous 15/18 kW
Continuous Torque Rating (133 lb/ft)
12 Chuck for right spindle (sub spindle)
Left spindle hollow cylinder set for 12-inch hollow chuck for bar diameter 4.0 in.
Full C-axis (CF-Control)
C-Axis Clamp Braking Torque (188 lb/ft)
Polar Coordinate Interpolation
Cylindrical Interpolation
Turrets
o Turret 1:
24 station BMT 65
12 Station Live Tool
Servo Drive Index
Y axis
Rotating Tool Spindle Speed 3600 rev/ min
Rotating tool 5.5/3.7 Kw 7.5 HP
o Turret 2:
24 station BMT 65
12 Station Live Tool
Servo Drive Index
Rotating Tool Spindle Speed 3600 rev/ min
Rotating Tool 5.5/3.7 Kw 7.5 HP
Coolant Supply / Chip Removal
o Water-Soluble coolant
o Chip conveyor (right discharge)
Filtration Accuracy: 50 um approximately 90%
Carrying Amount
Long Chip: 794 L/h
Short Chip: 13 L/h
o High pressure coolant system for two turret specifications
Chip Blaster F2-60
One pump for each turret (24 HP)
92.5 Gallon Tank
Measuring / Monitoring
o Manual in-machine tool pre-setter (removable type, Left Spindle and Right Spindle)
o Full closed loop control for X axis (turret 1) direct scale feedback, resolution 0.01 um
o Full closed loop control for X axis (turret 2) direct scale feedback, resolution 0.01 um
o Full closed loop control for Z axis (turret 1) direct scale feedback, resolution 0.01 um
o Full closed loop control for Z axis (turret 2) direct scale feedback, resolution 0.01 um
o Manual Machine tool presetter (Left Spindle side)
o Manual Machine tool presetter (Right Spindle side)
Automation
o Signal lamp 4 colors (red, yellow, green, blue)
o 1/F for exchanging control signals between the machine and peripheral equipment using
EtherNet/IP
o Interface for Bar feeder (EtherNet/lP Interface) with terminal block for power supply
Power Requirements
o 220 volts, 3 phase, 72 KVA
Control
o High Speed Canned Cycle
o Optional Block Skip (soft key type 2-9)
o X axis movement direction compliant with ISO standard
Construction
o Bar feeder
o Spindle Liners 1pc for 1.00" RS
o Coolant collector extension
Tools driven by direct drive motors built into the turrets
Fit within the maximum available areas of 18 ft - 0 in x 18 ft - 0 in
Positioning accuracy of less than .0002 inch
Special Construction
o Bar Feeder
Additional Parts / Products:
LNS TurboChip Conveyor Hinge Belt Type. Right Discharge LNS Quick Load Servo 105+ Barfeeder. 1 4 to
4-1/8
LNS Quick Load Servo Barfeeder Installation
Steel Spindle Liners for Main Spindle 3/8 4 91/4 Increments Qty 13) Steel Spindle Liners for
Second Spindle 3/8 4 91/4 Increments Qty 13) Samchully JB-M312 First Spindle
Samchully JB-M312 Second Spindle
High Pressure Coolant both turrets and spindle flush Chip Blaster F2-60
WTO Rotary Tools:
48-107658-HP - O.D. Cutting Holder - (4 ea.) 48-107660 Combination Tool Holder - (4 ea.)
48-100204 Cut-off Holder - (2 ea.)
48-102279R Cut-off Holder Right - (2 ea.) 48-102279l Cut-off Holder Left - (2 ea.)
420132020 Straight Drill/Milling Unit, ER32 QF, IC-EC - (4 ea.) 420132019-65 Straight
Drill/Milling Unit, ER32 QF, EC - (4 ea.) 420532026-65 Face Mill/ Drill Unit, ER32 QF, IC-EC - (4
ea.) 420532025-65 Face Mill/ Drill Unit, ER32 QF, EC - (4 ea.)
410120030-65 Straight Offset Drill/Milling Unit, ER32, EC - (4 ea.)
420532043-65 Right Angle Drill/Milling Unit, Both Sides, ER32 QF, EC - (4 ea.) 410120031-65
Straight Offset Drill/Milling Unit, ER32, IC-EC - (4 ea.) 410113002-65 Straight Offset
Drill/Milling Unit, ER20, EC - (4 ea.)
410120023-65 Straight Offset Drill/Milling Unit, ER32, EC - (4 ea.) 410113003-65 Straight
Offset Drill/Milling Unit, ER20, IC-EC - (4 ea.) 420225014-65 Right Angle Drill/Milling Unit,
ER25, EC - (4 ea.) 420525015-65 Right Angle Drill/Milling Unit, ER25 QF, IC-EC - (4 ea.)
420532031-65 Face Drill/Milling Unit, ER32 QF, EC - (4 ea.) 420532032-65 Face Drill/Milling
Unit, ER32 QF, IC-EC - (4 ea.) 411010000-65 Adjustable Angle Drill/Milling Unit, ER16, EC - (2
ea.)
411010001-65 Adjustable Angle Drill/Milling Unit, ER16, IC-EC - (2 ea.) 411007001-65 Adjustable
Angle Drill/Milling Unit, ER11, EC - (2 ea.) 411007000-65 Adjustable Angle Drill/Milling Unit,
ER11, EC - (2 ea.) 411500001-65 Offset Slitting Saw Unit, Type 14-2 - (2 ea.)
414532003-65 Broaching Unit, TN765050 - (1 ea.)
Reduction Sleeve 1-1/2 (2 Sets)
2400150038 3/8
2400150050 1/2
2400150063 5/8
2400150075 3/4
2400150088 7/8
2400150100 1.0
2400150125 1-1/4
ER 11 Collets (2 Sets)
190011000 (.276-.020)
ER 16 Collets (2 Sets)
190016000 (.394 -.020)
ER 20 Collets (2 Sets)
190020000 (.512-.039)
ER 25 Collets (2 Sets)
190025000 (.630-.039)
ER 32 Collets (2 Sets)
190032000 (.787-.079)
ER 11 Collets Sealed (2 Sets)
191011013 (.125)
191011019 (.188)
191011025 (.25)
ER 16 Collets Sealed (2 Sets)
191016013 (.125)
191016019 (.188)
191016025 (.25)
191016031 (.313)
191016038 (.375)
ER 25 Collets Sealed (2 Sets)
191016013 (.125)
191016019 (.188)
191016025 (.25)
191016031 (.313)
191016038 (.375)
191016044 (.438)
191016050 (.5)
191016056 (.563)
191016063 (.625)
ER 32 Collets Sealed (2 Sets)
191032013 (.125)
191032019 (.188)
191032025 (.25)
191032031 (.313)
191032038 (.375)
191032044 (.438)
191032050 (.5)
191032056 (.563)
191032063 (.625)
191032075 (.75)
Interchangeable Milling Arbors (2 Sets)
160015142 (.625)
160019142 (.75)
160023142 (.875)
160025142 (.1.0)
ER 25 QF Collet Chuck Adapter (2 Sets)
320025010 (ER16)
320025013 (ER20)
320025016 (ER25)
ER 25 QF Collet Chuck Adapter Short (2 Sets)
320025010-07 (ER16)
320025013-09 (ER20)
ER 25 QF Collet Chuck Adapter Long (2 Sets)
320025007-40 (ER11)
320025010-50 (ER16)
ER 25 QF Weldon/Whistle Notch Shank Adapter (2 Sets)
3201250250 (.25)
3201250312 (.313)
3201250375 (.375)
3201250500 (.5)
3201250625 (.625)
3201250750 (.75)
ER 25 QF Combination Mill Adapter (2 Sets)
3202250750 (.075)
3202251000 (.1.0)
ER 25 QF Blank (5 ea.)
329025000
ER 25 QF Protection Cover (10 ea.)
337025000
ER 25 QF Master Gauge (1 ea.)
339125000
ER 32 QF Collet Chuck Adapter (2 Sets)
320032013 (ER20)
320032016 (ER25)
320032020 (ER32)
ER 32 QF Collet Chuck Adapter Short (2 Sets)
320032013-07 (ER20)
320032016-07 (ER25)
ER 32 QF Collet Chuck Adapter Long (2 Sets)
320032007-50 (ER11)
320032010-60 (ER16)
ER 32 QF Weldon/Whistle Notch Shank Adapter (2 Sets)
3201320250 (.25)
3201320312 (.313)
3201320375 (.375)
3201320500 (.5)
3201320625 (.625)
3201320750 (.75)
ER 32 QF Combination Mill Adapter (2 Sets)
3202320750 (.075)
3202321000 (1.0)
3202321250 (1.25)
ER 32 QF Blank (5 ea.)
329032000
ER 32 QF Protection Cover (10 ea.)
337032000
ER 32 QF Master Gauge (1 ea.)
339132000
One Hand Wrenches/Sets
0067732000 (5 ea.)
0067725001 (5 ea.)
00675000958 (5 ea.)
00675000591 (5 ea.)
00675000515 (5 ea.)
00675000902 (5 ea.)
00675000914 (5 ea.)
00675000448 (5 ea.)
Installation: Contractor shall provide personnel to oversee equipment assembly, installation,
startup and test prior to equipment acceptance and commissioning.
Calibration/ Setup: Contractor personnel shall perform all calibration, verification and
performance testing of the equipment after installation and demonstration of proper operation prior
to Government customer providing acceptance.
Training: Contractor shall provide on-site orientation training for this equipment.
NOTES
FANUC Brand Drives and Control are a must to coincide with current programming and minimize
training.
WTO live Tooling is the current brand we use in the shop.
