NSN(s): 6140-01-446-9498
Item Description: SEE RFQ
Manufacturer's Code and Part Number (if applicable): N/A
Drawing Number (if applicable): SEE RFQ
Specification Number (if applicable): N/A
Qualification Requirements (e.g. QPL) and where information on qualification requirements may be obtained. (if applicable): N/A
Quantity (including option quantity) :
Anticipated type of contract is an IDC. Items to be shipped to various military depot locations within established minimum & maximum quantity limits on an as needed basis.
Unit of Issue: EA
Destination Information: FOB DESTINATION STOCK ONLY
Delivery Schedule: SEE RFQ
**
Anticipated type of contract is an Indefinite Quantity Contract (IQC), I/A/W FAR Part 12 procedures.
All responsible SMALL BUSINESS sources may submit an offer/quote which shall be considered.
---
( x ) The solicitation will be available on DLA's Internet Bid Board Site (https://www.dibbs.bsm.dla.mil/RFP/) on or about 09/06/2022.
( x ) The Small Business size standard is _1250_ employees.
( x ) The proposed procurement contains an option to extend the contract period one or more times at the discretion of the government. The total duration (base plus option years) shall not exceed 5 years.
(x ) While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation
TYPE OF SET-ASIDE: 100% SBSA
-----------------------------------------------------------------------------------------------------------------------------
NSN: 6140-01-446-9498
BATTERY, STORAGE
LEAD-ACID, DRY CHARGED, MAINTENANCE FREE
SUPPLIED WITH ACID OVERPACK (ELECTROLYTE)
D.O.T. CLASS: CORROSIVE UN2796
SHIPPING NAME: BATTERY, FLUID ACID
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE
SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE
ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE
APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON
REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RT001: MEASURING AND TEST EQUIPMENT
CONTRACTOR FAT
NUMBER OF UNITS REQUIRED TO BE TESTED: 10 BATTERIES, 4 EA.
CONTAINER, 7 EA. COVERS PER ATPD 2206
ZD025: MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
ZD072: Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety
Data, Transportation Data and Disposal Data for Hazardous Materials
Furnished to Government Activities, establishes the requirement for
preparation and submission of Safety Data Sheets (SDS) in lieu of
Material Safety Data Sheets (MSDS) by suppliers who provide hazardous
materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified
its Hazard Communication Standard (HCS) to conform to the United Nations
Globally Harmonized System of Classification and Labeling of Chemicals.
As a result of this change, GSA revised Federal Standard No. 313-E
requiring Safety Data Sheets for classifying chemicals and communicating
the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for
review and approval prior to award, safety data sheets consistent with
the requirements found at 29 C.F.R. 1910.1200 for hazardous materials
delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer
for review and approval prior to award, Hazardous Communication Standard
(HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or
current Consumer Product Safety Act (CPSA), Federal Hazardous Substance
Act (FHSA) labels when subject to labeling requirements under those
statutes. This product labeling is required for hazardous materials
delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data
sheets, hazardous communication labels, and requirements of 29 C.F.R.
1910.1200.
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html
RS062: Shelf life requirement RS001 for a TYPE 2 (CODE 9) item with a
shelf life of 60 month (extendable) applies to this item.
ZD080 :SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
SHELF LIFE: TYPE II, 60 MONTHS
FIRST ARTICLE TESTING AS REQUIRED BY PARA 4.4
CORRECTION TO ATPD 2206 REV 7 AS FOLLOWS:
PARA. 4.6.17.A IS CHANGED TO INDICATE "-54 +/-
1 DEGREE C" IN LIEU OF "-48 +/- 1 DEGREE C".
EXCEPTION TO SPEC:
DELETE REQUIREMENT 3.3.12<(>,<)>
DELETE 3.2.2 IN ITS ENTIRETY AND REFERENCE TO
3.2.2 IN 4.6.1
END OF EXCEPTIONS.
A0003: MIL-STD-130N(1) DATED 16 NOV 2012.
IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
CA070: FULL AND OPEN COMPETITION APPLY
ZD074: THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM - (TO INCLUDE 'COMMERCIAL OF A TYPE')
CRITICAL APPLICATION ITEM
IAW BASIC DRAWING NR 19207 ATPD2206
REVISION NR 7 DTD 08/13/2001
PART PIECE NUMBER: 6TMF/TYPEI
IAW REFERENCE SPEC NR MS52149G NOT 2
REVISION NR DTD 06/12/2015
PART PIECE NUMBER:
PREP FOR DELIVERY
PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999
QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D4 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:33 -33 Type II, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
Container for Battery Fluid Acid shall conform to latest version of IATA
specification for plastic containers, overpack within a 4G fiberboard
box, Box shall be one per battery.
THIS MATERIAL IS CONSIDERED HAZARDOUS MATERIAL AND REQUIRES SPECIAL
PACKAGING, MARKING, AND LABELING. PLEASE ENSURE THAT ALL PACKAGING
REQUIREMENTS AS DETAILED IN THE CONTRACT ARE MET. THIS BATTERY IS
REGULATED BY THE DEPARTMENT OF TRANSPORTATION (DOT). A MATERIAL SAFETY
DATA SHEET SHALL ACCOMPANY EACH SHIPMENT.
HAZARDOUS MATERIAL PACKAGING REQUIREMENTS SHALL COMPLY WITH TITLE 49
CODE OF FEDERAL REGULATIONS (CFR). AUTHORIZED SPECIFICATION PACKAGINGS
FOR BATTERIES ARE LOCATED IN TITLE 49 CFR, PARAGRAPH 173.159. SELECTION
OF AUTHORIZED SPECIFICATION PACKAGINGS MUST ENSURE IT DOES NOT EXCEED
THE WEIGHT AND SIZE LIMITATIONS OF THE CONTAINER.
SELECTED AUTHORIZED SPECIFICATION PACKAGINGS SHALL ADEQUATELY PROTECT
THE BATTERY AGAINST SHOCK AND VIBRATION AND ENSURE TABS TO DO NOT BREAK
AND CAUSE AN INTERNAL SHORT CIRCUIT WITHIN THE BATTERY. AUTHORIZED
SPECIFICATION PACKAGINGS (CONTAINERS) SHALL NOT BE DAMAGED IN ANY WAY.
ASSETS UNDER THESE CONDITIONS SHALL BE CONSIDERED AN UNACCEPTABLE
PRODUCT AND SHALL NOT BE SHIPPED TO ANY DEPOT, OR CUSTOMER, OR RECEIVED
INTO ANY DOD INVENTORY SYSTEM. MATERIAL WILL BE REFUSED AND RETURNED TO
CONTRACTOR.
EACH CONTAINER SHALL BE MARKED AND LABELED IN ACCORDANCE WITH THE
GOVERNING HAZARDOUS MATERIAL REGULATION (DEPENDENT UPON MODE OF
TRANSPORTATION) AND IN ACCORDANCE WITH MIL-STD-129 TO BE PROPERLY
IDENTIFIED AND RECEIVED INTO INVENTORY. SHELF LIFE MARKINGS SHALL BE
APPLIED TO THE CONTAINER'S LABEL TO ENSURE STORAGE CONTROLS ARE IN PLACE
AND INSPECTION DATA IS AVAILABLE.
PROPER SHIPPING NAME, UN NUMBER, HAZARD CLASS, AND PACKING GROUP
REQUIRED TO BE MARKED ON EACH CONTAINER
HAZARD WARNING LABEL REQUIRED ON EACH AUTHORIZED PACKAGING (CONTAINER):
CORROSIVE, AS DISPLAYED BELOW. IN ADDITION, ORIENTATION LABELS SHALL BE
APPLIED TO THE PACKAGE TO ENSURE IT DOES NOT LEAK (ARROW UP,
ILLUSTRATION ONLY).
ALL IDENTIFICATION MARKINGS AND HAZARD WARNING LABELS SHALL BE PLACED ON
THE SAME CONTAINER PANEL.
ALL NON-POP CONTAINERS SHALL MEET BOX MAKERS CERTIFICATE REQUIREMENTS IN
ORDER TO ADEQUATELY HOLD LOAD IMPOSED. CHECK SPECIFICATION FOR WEIGHT
LIMITATION AND CHECK PACKAGED WEIGHT TO ENSURE THE CONTAINER CAN
ADEQUATELY PROTECT THE BATTERY DURING HANDLING, STORAGE, AND/OR
TRANSPORTATION.
SHIPMENTS BY MILITARY AIR SHALL USE AFMAN 24-204 SHIPPERS DECLARATION TO
ENSURE MATERIAL WILL NOT BE FRUSTRATED AT AERIAL PORTS.
