REPAIR VEEDER ROOT MONITORING SYS OF U/G TANK, F-580

The scope of this project is to 1] Replace 3/4" RS conduits approx._40-lf., with 4 - #12 thhn AWG wires, push button switch, pull box, Horn and strobe light, Veeder root TLS350, including wires, support, fittings and accessories; 2] Verify exact dimension then cut/fabricate approx._6" diameter ductile iron pipe spool of different length and Install new pipe lines, valves and fittings approx._25-lf., 6" inches diameter; 3]. Lay-out/assist, mark locations of trench, tone mark areas & hand excavate earth for construction of post foundation & electrical trench, approx._20-lf; 4]. Fabricate and install steel post for Horn & Strobe light; 5]. Provide holes to the existing U/G Tank, and Manhole wall prior to install pipe line; 6]. Fill cement grout the disturbed surfaces & backfill/compact trench with sand cushion and 7]. Prepare, prime and finish paint 2-coats new conduits, C-bar post, including vent pipe.