NAWS0355 UPGRADE BUILDING 20316 TO A FUEL LABORATORY

UPGRADE SPACE FOR FUEL LABORATORY WITH ALL APPURTENANCES AND ACCESSORIES REQUIRED IN UFC 3-460-01. DEMO CONCRETE PADS. INSTALL NEW FLOOR, CEILING, EXPLOSION PROOF LIGHTS, OUTLETS, AND FUME HOOD ETC. INSTALL HVAC SYSTEM CAPABLE OF MAINTAINING THE LABORATORY AT 73 DEGREES F (23 DEGREES C) PLUS OR MINUS 5 DEGREES F (3 DEGREES C). LAB SPACE REQUIRES A HUMIDITY CONTROL EQUIPMENT (WATER SOFTENER CAPABILITIES ARE NEEDED IN HARD WATER ENVIRONMENTS). * IAW 16-2.5 OF THE UFC CORROSION CONTROL. CORROSION CONTROL IS EXTREMELY IMPORTANT IN THESE TYPES OF FACILITIES. CORROSION PREVENTION STRATEGIES SHOULD BE BASED ON THE CLIMATE OF THE LOCATION. REFER TO UFC 1- 200-01 FOR ENVIRONMENTAL SEVERITY CLASSIFICATION AND HUMIDITY DESIGN REQUIREMENTS FOR THESE LOCATIONS AND THEIR CORROSION PREVENTION REQUIREMENTS. EVERY EFFORT SHOULD BE MADE TO PREVENT CORROSION BY MATERIAL SELECTION, CONSTRUCTION PRACTICES AND STANDARD CORROSION PREVENTION PRACTICES REGULATORY REQUIREMENT: INSTALLATION OF A NEW LABORATORY BUILDING WITH ALL APPURTENANCES AND ACCESSORIES REQUIRED IN UFC 3-460-01 CHAPTER 11, NFPA 45, AND UFC 4-310-03 TYPE C++ LABORATORY.