Search Contract Opportunities

Underwater Body and Freeboard Coating System for CGC Oak in Portsmouth, VA 23703

Type: Synopsis Solicitation • ID: 70Z8522P2022009

Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. Request for Quotations number is 70Z8522P2022009 and is issued as a request for quotations (RFQ). This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. This Request for Quotations incorporates provisions and clauses in effect through Federal Acquisition Circular 2005-84 dated Nov 1, 2015. The NAICS Code is 336611. The Small Business Size Standard is 1250. This is a total small business set aside. All responsible sources may submit proposals that will be considered by the agency. The contract will be awarded on a firm-fixed-price basis using simplified acquisition procedures in accordance with FAR Part 13.5.

**For purposes of evaluation and award, Past Performance is considered to be more important than Price.

Offerors shall submit quotes as follows

Date: SEPTEMBER 28TH , 2022

Time: 0800 Pacific Standard Time (PST)

Place: William.a.swordjr@uscg.mil

REQUIRED DOCUMENTS:

Each Offeror shall furnish the information required by the solicitation, which includes:

Section 1: Price quote including cost breakdown.

Section 2: Past Performance / References Proposal (This section should include the offerors completed representations and certifications.); and

Section 3: Any issued amendments to the solicitation.

ANTICIPATED AWARD DATE: The contract is expected to be awarded on or about 09/28/2022.

QUESTIONS: The last day to ask questions will be SEPTEMBER 28TH , 2022, 0800 Pacific Standard Time (PST). Questions shall be submitted via e-mail to William.A.Swordjr@uscg.mil. After this date, unless amended, questions will not be accepted.

For information regarding this solicitation, please contact WILLIAM SWORD, 510-437-5436.

Please Note: Amendments to this solicitation will be publicized in the same manner as the initial synopsis and solicitation.

Questions and quotes shall be emailed to William.A.Swordjr@uscg.mil. Contractors are responsible for verifying receipt of quotes.

INTERESTED VENDORS PLEASE SEND OFFICIAL QUOTE, WITH A SAM.GOV REGISTERED DUNS NUMBER, AND EMAIL TO William.A.Swordjr@uscg.mil.

DISCREP 2022009 Underwater Body and Freeboard Coating System Failure - OAK

SCOPE

Intent. This work item describes the requirements for the Contractor to inspect and preserve the U/W body surfaces and freeboard areas.

The purpose of the preservation tasks covered in this item is to repair the

anticorrosive (AC) undercoating system and freeboard where the substrate is exposed.

REFERENCES

Coast Guard Drawings

Coast Guard Drawing 225B WLB 601-001, Rev P; General Arrangement Inboard and Outboard Profiles

Coast Guard Drawing 55 ANB 103-002, Rev P, Outboard Profile, Sections and Arrangements

Coast Guard Drawing 55B ANB 103-001, Rev K, Outboard Profile, Sections and Arrangements

Coast Guard Drawing 55C ANB 801-001, Rev H, Outboard Profile, Sections and Arrangements

Coast Guard Publications

Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2020, General Requirements

Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2020,

OTHER REFERENCES

Underwater Ship Husbandry Manuals Chapter 20 Painting and Fairing Compounds NAVSEA Pub S0600-AA-PRO-200 0910-LP-0105-8022

Coast Guard Commandant Instruction (COMDTINST) M10360.3, Jun 2006, Coatings and Colors Manual

MIL-A-22262, Mar 1996; Abrasive Blasting Media Ship Hull Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface

Preparation Standard SSPC-SP 10/NACE No. 2, 2007, Near-White Metal Blast Cleaning

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.11 (SSPC-SP11), 2012, Power Tool Cleaning to Bare Metal

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface

Preparation Standard SSPC-SP WJ-2, 2012, Waterjet Cleaning of Metals Very Thorough Cleaning

REQUIREMENTS

Location of work to be performed:

USCGC OAK WLB

4000 Coast Guard Blvd,

Portsmouth, VA 23703

Period of Performance:

31 October 2022 01 November 2022

Contractor shall inspect the underwater body and boot top, identify where the anti-abrasive and anti-corrosive coatings have failed, prepare and paint up to100 square feet of underwater hull and boot top area with HYCOTE 151 red and up to 50 square feet of freeboard designated by ships force with HYCOTE 151 black.

Preservation requirements.

Surface preparation methods shall be performed in accordance with Underwater Ship Husbandry Manuals Chapter 20 Painting and Fairing Compounds NAVSEA Pub S0600-AA-PRO-200 0910-LP-0105-8022

Anti-corrosive, boot top and freeboard coating system repair.

Coat bare steel surfaces with the coating system specified in Underwater Ship Husbandry Manuals Chapter 20 Painting and Fairing Compounds NAVSEA Pub S0600-AA-

PRO-200 0910-LP-0105-8022

Contractor will supply all material and equipment in accordance with Underwater Ship Husbandry Manuals Chapter 20 Painting and Fairing Compounds NAVSEA Pub S0600-AA-PRO-200 0910-LP-0105-8022. Appendix A

Contractor will be responsible for the removal and disposal of all materials used.

NOTES

Definitions.

U/W body. The underwater body is defined as the areas from the bottom of the keel to the upper edge of the boot-topping, as shown on Coast Guard Drawing 225B WLB 601-001, including appendages, rudders, transducer hull rings, sea chests (including the sea chest inlet up to the final connection with the flange face at the sea chest isolation valve(s)) and sea chest-to-sea bay piping, bilge keels, struts, skegs, gratings, and rope guards.

Points of Contact:

Vessel: USCG CGC OAK

Catelli, Michael E CWO-2

(401) 367-1646

(401) 439-5488

Michael.e.cetelli@uscg.mil

Product Line Support:

CWO DiMercurio

SFLC-IBCT, Asset Manager

978-998-2694

salvatore.d.dimercurio@uscg.mil

Overview

Response Deadline
Sept. 28, 2022, 11:00 a.m. EDT Past Due
Posted
Sept. 23, 2022, 6:38 p.m. EDT (updated: Sept. 26, 2022, 12:48 p.m. EDT)
Set Aside
Small Business (SBA)
Place of Performance
Portsmouth, VA 23703 United States
Source
SAM

Current SBA Size Standard
1300 Employees
Pricing
Fixed Price
Signs of Shaping
The solicitation is open for 4 days, below average for the Surface Forces Logistics Center. 50% of obligations for similar contracts within the Coast Guard were awarded full & open.
On 9/23/22 Surface Forces Logistics Center issued Synopsis Solicitation 70Z8522P2022009 for Underwater Body and Freeboard Coating System for CGC Oak in Portsmouth, VA 23703 due 9/28/22. The opportunity was issued with a Small Business (SBA) set aside with NAICS 336611 (SBA Size Standard 1300 Employees) and PSC J020.
Primary Contact
Name
William A. M. Sword   Profile
Phone
(510) 437-5436

Documents

Posted documents for Synopsis Solicitation 70Z8522P2022009

Incumbent or Similar Awards

Potential Bidders and Partners

Awardees that have won contracts similar to Synopsis Solicitation 70Z8522P2022009

Similar Active Opportunities

Open contract opportunities similar to Synopsis Solicitation 70Z8522P2022009

Additional Details

Source Agency Hierarchy
HOMELAND SECURITY, DEPARTMENT OF > US COAST GUARD > SFLC PROCUREMENT BRANCH 2(00085)
FPDS Organization Code
7008-70Z085
Source Organization Code
100187922
Last Updated
Sept. 26, 2022
Last Updated By
william.a.swordjr@uscg.mil
Archive Date
Oct. 13, 2022